Install A Nitrous Express System

Share this Post:

two relay locations

This is where I attached the two relays.  The one on the right is the nitrous relay and the one closest to you is the window switch relay.  You can also see where I connected the three wires into one for the common ground; it’s the yellow eye connector behind the relay.  Make sure all of your grounds are very clean and in contact with bare clean metal, no paint!

regulator

Here is a shot of the fuel pressure safety switch.  The screw on the left that says "NO", the white wire #85 on the nitrous relay attaches to that.  The screw on the left that says "C" goes to the ground behind the relay.

Categories: Mustang Tech

Comments are closed.