Replacing Your 2001 Mach 460 Head Unit


Warning: file_exists(): open_basedir restriction in effect. File(/.) is not within the allowed path(s): (/home/stang:/usr/lib/php:/usr/local/lib/php:/tmp) in /home/stang/public_html/wp-content/themes/canvas/functions/admin-functions.php on line 598
Share this Post:


Additional Notes:


If you get a pop when your amps turn on, you could put a 1K resistor in the amp turn on lead and that should solve your


problem. As for the 2000′s, I’m not positive, but I believe that they had a slightly different setup. 2001 is the year things got difficult from what I’ve read.


Crossover frequencies that work best with the stock setup are 170Hz for the tweeters and 50Hz for the subs.  Check your head unit to make sure though. The best bet is to just turn it on and listen to what sounds best. Just make sure you’re not cranking bass through those tweeters.


I have no personal experience with the ’00 setup, but I believe you should be able to buy a simple wiring harness. That??s how it was in my old ’94. I don’t think that they complicated the system until ’01. I’m sure you can get a harness from any stereo store.

Categories: Mustang Tech

Comments are closed.