Mustang Forums at StangNet

Some questions about my Bullitt

This is a discussion on Some questions about my Bullitt within the Bullitt forums, part of the Special Production category; Hey guys, I'm new to the site and have some questions about my Bullitt. 1st off, it's all stock except ...

Go Back   Mustang Forums at StangNet > Mustang Forums > Special Production > Bullitt

Over 151,000 Members!!

Register Vendors Garage FAQ Calendar Search Today's Posts Mark Forums Read



Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old 03-30-06, 01:53 PM
Member
 
Join Date: March 2006
Location: Wichita, KS
Posts: 3
Some questions about my Bullitt

Hey guys, I'm new to the site and have some questions about my Bullitt. 1st off, it's all stock except for a set of Flowmasters the guy I bought it from had installed. Does anybody know what size of exhaust these came stock with? IS it 2 1/4, or just 2"? I've been running Flowmasters on all my vehicles for the past 5 years and I'm kinda looking to change it up and thought about Magnaflow. Problem is, a cat back kit, or to have the local shop make me one is gonna cost about $500.00 I'd be better off using my mufflers and going with 2 1/2" pipe with some tips to save the money. What do you guys think? Magnaflow or Flowmaster on my stang?

Also, does anybody know what axles are in the Bullitt? Same as the stock GT? This car just spins through 1st and 2nd with street tires and I'd like to run some slicks I've got, but I'm kinda scared to. A guy I know with a 2001 GT broke an axle running some ET streets and his was all stock except for 4.11 gears.

And my last question is what kind of mods do you recommend for this Stang? I know it's got the better intake and I'm going with a better exhaust, but is there anything else that I can do to it for not a whole lot of money? It's my daily driver, so I'm not looking at any internal mods, just some bolt ons like maybe a programmer.

PS. Anybody know what the actual HP is on a stock Bullit? I've read 265-270, just curious if these are accurate.

Thanks,

Garrett
Reply With Quote
  #2 (permalink)  
Old 03-30-06, 05:08 PM
Crzyhrse's Avatar
Official Member
 
Join Date: December 2004
Location: Seattle, WA
Posts: 955
2 1/4" exhaust is stock from factory. 8.8 axle with 28 splines. You can get a magnaflow catback for like $350 through this website. Just go to the Partshopper discount forum at the top of the forums page. They were initially rated at 265HP, but then later on supposedly re-rated to 275HP.
Reply With Quote
  #3 (permalink)  
Old 03-30-06, 11:03 PM
Member
 
Join Date: March 2006
Location: Wichita, KS
Posts: 3
Thanks for the info. I've been here 1 day and already love the site.
Reply With Quote
  #4 (permalink)  
Old 04-03-06, 03:48 PM
QU!CK's Avatar
Official Member
 
Join Date: April 2004
Location: Charlotte, NC
Posts: 149
My bullitt is also my daily driver and I'm happy with it's current power output after doing a few bolt-ons


Our cars do have a solid axle just like the regular GT's. Another good site to check out is www.imboc.com

It's the "International Mustang Bullitt Owners Club" so there are plety of good threads and useful info on there.


-J
Reply With Quote
Reply




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads

Thread Thread Starter Forum Replies Last Post
Bullitt suspension kit has arrived.....couple questions Michigan 4.6 Tech 17 08-25-05 10:17 AM
2001 Bullitt Questions mustang90 4.6 Tech 8 10-27-04 08:42 PM
bullitt suspension( with or without the bullitt sway bars?) ADRENLN 4.6 Tech 2 10-08-04 03:53 AM
25 mm wheel spacers and bullitt wheels. 1stmust02 4.6 Tech 6 06-02-04 01:25 PM

 




All times are GMT -6. The time now is 02:02 AM.