Mustang Forums at StangNet

Selling (2.3 N/A Project car)

This is a discussion on Selling (2.3 N/A Project car) within the 2.3L Mustang Talk forums, part of the 2.3L Mustang category; Yes this is listed in the Midwest Classifieds section that 4 people read (non from this section) OK this has ...

Go Back   Mustang Forums at StangNet > Mustang Forums > 2.3L Mustang > 2.3L Mustang Talk

Over 151,000 Members!!

Register Vendors Garage FAQ Calendar Search Today's Posts Mark Forums Read



Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old 02-03-08, 09:39 AM
kiddiccarus's Avatar  
Join Date: December 2003
Location: RCA DOME/Aisle 328/Row 3/ Seats 4 and 5 or Bardstown, Ky
Posts: 1,298
Selling (2.3 N/A Project car)

Yes this is listed in the Midwest Classifieds section that 4 people read (non from this section)

OK this has taken a lot of going back and forth in my head and I have came to the conclusion that I do not have the time or the local help to complete this project. I chose to sell it all and go a different route.

Please I am not looking to part anything out, I am going to list all that I know about this and the parts to be sold as a whole for the price I am asking. I know its tax time and someone out there is looking for a project car.

Location: Bardstown, Kentucky 40004

1. 1993 LX 2.3 N/A Hatch - Blue, was wrecked in 2006 and I have replaced the front end on it (hood, lights, header panel, fenders, bumper cover) Still has good alignment that was set prior to the accident. Auto Trans is NO GOOD and will not move (Neutral and Park work) Engine is good, coolant system is good, AC is going out, Heater is good, sun roof leaks some, hatch and doors do not. New Timing belt, New Starter, Dual Exhaust.

2. I bought some parts for the engine swap that will all be included in this price.

Short Block - 1986 Merkur with stock internals.
Iron head - no internals
Some cam (could have came from head)
box of head parts (non roller)

T-5 no bell Trans Only No other parts for the swap.

Long Block:

2.3 1986 Merkur ( I took this engine out of the car myself)

Block with speed pro pistons
Bob's Log Header
t-3 (never used by me I purchased it with the parts, seems to be fine by looks of eye and all)
Ranger Roller cam installed in hhead with all parts. fuel rail injectors and all stock parts other than listed for an 1986 Merkur

Large and small VAM
1 extra High Tech Cam - 205401
PK-1 Computer

$1000.00 cash and carry (no seriously you have to bring something like a trailer to take it because the trans dont work)

PM me but I will check the thread once a day for questions.

Before:
Click the image to open in full size.

Engine Bay:
Click the image to open in full size.

Damage in Wreck:
Click the image to open in full size.

Click the image to open in full size.

Current View:
Click the image to open in full size.

OK like I said I am not parting this out at this time. If someone does not buy the entire package I will make a 2nd go of the project before I say screw it all and scrap it. This is a limited time offer also before I decide to take it into the shop and rip it all apart in a mad rage.....
Reply With Quote
  #2 (permalink)  
Old 02-03-08, 10:40 AM
351wcoupe's Avatar
Official Member
 
Join Date: February 2003
Location: Manhattan, Kansas
Posts: 1,845
don't do it!!!.....x2
Reply With Quote
  #3 (permalink)  
Old 02-03-08, 02:24 PM
kiddiccarus's Avatar  
Join Date: December 2003
Location: RCA DOME/Aisle 328/Row 3/ Seats 4 and 5 or Bardstown, Ky
Posts: 1,298
ahhh I have to, its a paperweight for me right now. the boy and girl are still 4 years from driving and I have to get things done on the 95 3.8 still. 1G will get me some springs and my bracing that I need
Reply With Quote
Reply




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


 




All times are GMT -6. The time now is 10:02 PM.