Mustang Forums at StangNet

help with my GF's car.

This is a discussion on help with my GF's car. within the Other Auto Tech forums, part of the General Automotive Forums category; shes got an 05 sentra 1.8L. its been doing this for a while aparently, im detailin her car for her ...

Go Back   Mustang Forums at StangNet > General Automotive Forums > Other Auto Tech

Over 151,000 Members!!

Register Vendors Garage FAQ Calendar Search Today's Posts Mark Forums Read



Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old 11-27-08, 02:57 PM
fivespeedsteed's Avatar
Official Member
 
Join Date: October 2003
Location: Richmond, VA
Posts: 381
Garage
help with my GF's car.

shes got an 05 sentra 1.8L. its been doing this for a while aparently, im detailin her car for her over christmas break, and i want to fix this problem. it takes forever to crank. like more than 8 seconds, with a pause in the middle. even if its up to temp it cranks twice as long as a toyota.

she said she had someone look at it once and i forget what she said it was but it didnt make sense, it was like a crank sensor, or something that didnt make sense, so im thinking its the CPS or the cam PS. when i get back to school im gonna try to look at it. what can i do to pinpoint it? any ideas?
Reply With Quote
  #2 (permalink)  
Old 11-27-08, 05:24 PM
5.0Droptop's Avatar
Neutered Member
 
Join Date: May 2002
Location: In the middle of a corn field: Indiana
Posts: 2,318
Code scanner?
Reply With Quote
  #3 (permalink)  
Old 11-27-08, 09:30 PM
old_blue's Avatar
Official Member
 
Join Date: November 2003
Posts: 800
weak starter?
Reply With Quote
  #4 (permalink)  
Old 11-27-08, 10:37 PM
cenok is family's Avatar
Official Member
 
Join Date: June 2003
Location: Norman, Ok
Posts: 957
does it crank slow or just take forever? if it was a crank or cam position sensor, a CEL would be on and it wouldn't run well.
Reply With Quote
  #5 (permalink)  
Old 11-28-08, 01:51 AM
Makdaddymac's Avatar
Official Member
 
Join Date: May 2005
Location: orlando
Posts: 264
cam postion snesor
or timing!
check timing....should have a small cap looking th9ing that has a bolt that loosens to turn and adjust timing(sort of like a distbitur) they tend to get loose on some cars(did on my 1.8L) turned it back and tightened it was good>

does car seems sluggish?

Last edited by Makdaddymac; 11-28-08 at 01:52 AM.
Reply With Quote
  #6 (permalink)  
Old 11-28-08, 03:01 AM
Darkwriter77's Avatar
Resident Ranting Negative Nancy
 
Join Date: July 2005
Location: Apache Junction, AZ
Posts: 1,341
Does it crank slow, or does it just crank a long time before it actually starts? And does her boyfriend know there's an "Other Auto Tech" forum for this sort of thing?
Reply With Quote
  #7 (permalink)  
Old 11-30-08, 12:07 AM
fivespeedsteed's Avatar
Official Member
 
hush up darkwriter i stick to BHR and 5.0 talk, i didnt even know we had this forum, but i do from here out.

no it cranks like a racehorse, and once its running theres no CEL, and it runs good, very peppy little car, no hesitation.
Reply With Quote
  #8 (permalink)  
Old 11-30-08, 08:41 AM
hotcobra03's Avatar
Premier Member
 
Join Date: July 2007
Location: poteet,tx
Posts: 838
Sounds like a fuel problem. Most start fast .start with basic diagnostic routines complete tune up and use a spark plug gapper.fuel filter is a must and pcv and air.also google obd2 alot of good info . Good luck
Reply With Quote
Reply




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 




All times are GMT -6. The time now is 05:25 AM.