Mustang Forums at StangNet

Fuel sending unit

This is a discussion on Fuel sending unit within the MII Discussion forums, part of the Mustang II category; Does anyone know where to get a fuel sending unit? I am looking to replace mine and go from a ...

Go Back   Mustang Forums at StangNet > Mustang Forums > Mustang II > MII Discussion

Over 151,000 Members!!

Register Vendors Garage FAQ Calendar Search Today's Posts Mark Forums Read



Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old 11-27-08, 10:50 PM
StangIIttop's Avatar
Member
 
Join Date: September 2003
Location: Cedar Rapids, Ia
Posts: 26
Fuel sending unit

Does anyone know where to get a fuel sending unit? I am looking to replace mine and go from a 5/16" line to a 1/2" line. I would like to keep the stock one and modify a new one if possible.
Reply With Quote
  #2 (permalink)  
Old 11-28-08, 12:16 AM
LILCBRA's Avatar
Official Member
 
Join Date: December 2005
Location: Williamsburg, Iowa
Posts: 162
I am pretty sure that Duffields just west of CR has a handful of IIs. Been in there a few times looking for misc. parts for mine, although it has been a little more than a year since I have been there.
Reply With Quote
  #3 (permalink)  
Old 11-28-08, 12:29 AM
StangIIttop's Avatar
Member
 
Join Date: September 2003
Location: Cedar Rapids, Ia
Posts: 26
That must be the old Arlo Beckers place. Havent been there for years. Will have to check it out. Thanks. Did you ever get your car to the track this year?
Reply With Quote
  #4 (permalink)  
Old 11-29-08, 02:42 PM
Member
 
Join Date: September 2008
Posts: 17
Quote:
Originally Posted by StangIIttop View Post
Does anyone know where to get a fuel sending unit? I am looking to replace mine and go from a 5/16" line to a 1/2" line. I would like to keep the stock one and modify a new one if possible.
Saw one on ebay today, supposely new for the Mustang II. A bit pricey at $100.00 for a buy it now.
Reply With Quote
  #5 (permalink)  
Old 11-30-08, 10:51 AM
LILCBRA's Avatar
Official Member
 
Join Date: December 2005
Location: Williamsburg, Iowa
Posts: 162
Yes, I actually did. Took it to Newton in October for the show and race they had. Only got 2 passes though. Didn't seem really well organized. I definately need to do some more work to her, traction is a serious problem, but then again, so is keeping my foot out of it! They run 1/8 mile down pit row, and my best time of the 2 was 9.82. That of course was me spinning through first and second and into third before going through the traps. One wheeler...got my eye on the Lock-Right locker, but that will have to wait til after the holidays. After that, I will probably get some new wheels and tires. I didn't run it on the slicks yet either, still have to get them screwed to the rims, so that would probably help alot too. All in all, had a good time!
Reply With Quote
  #6 (permalink)  
Old 12-01-08, 09:25 PM
StangIIttop's Avatar
Member
 
Join Date: September 2003
Location: Cedar Rapids, Ia
Posts: 26
I did that at Cordova. Had the stock 13" tires on it and I spun almost 1/2 the track. It was a cold nite and my 60' time was over 2.5 but I did have alot of fun. It was good for doing smoke shows. Now I have 15" MT drag radials and that brought me down to 1.8 at 8.1 in the 1/8. Next year I will try nitrous but need to get a bigger fuel line first.
Reply With Quote
Reply




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


 




All times are GMT -6. The time now is 03:57 AM.