Mustang Forums at StangNet

5.0 35th ??

This is a discussion on 5.0 35th ?? within the 35th Anniversary forums, part of the Special Production category; first of all i couldnt find anything on here about it i dont know if its been done or if ...

Go Back   Mustang Forums at StangNet > Mustang Forums > Special Production > 35th Anniversary

Over 151,000 Members!!

Register Vendors Garage FAQ Calendar Search Today's Posts Mark Forums Read



Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old 01-03-09, 07:35 PM
Official Member
 
Join Date: July 2005
Location: in my house
Posts: 106
5.0 35th ??

first of all i couldnt find anything on here about it i dont know if its been done or if anyone has posted anything onnhere after they did it

but i really need to know

i am in the process of pulling out the V-6 in my 35th and dropping in a fuel injected
302
i am gonna use the motor wiring harness for a 94-95 because it plugs into the harness on the right side of the car to the factory V-6 plug now i am also using a speed density computer therefore eliminating a maf

My question here is well the afore mentioned and is there any difference in the harness between the years and between the 5.0 4.6 and the V6

if you know of anything diagrams pictures anything please show me where to find them and if this has not been done i will post pics as i go

any help here would be greatly appreciated

thanks
Alan kendall
Reply With Quote
  #2 (permalink)  
Old 01-03-09, 10:35 PM
Slow35th's Avatar
Member
 
Join Date: December 2008
Posts: 34
for one why would you convert to speed density? also why not a get a 4.6?k member is different for a v6.
Reply With Quote
  #3 (permalink)  
Old 01-04-09, 08:07 AM
Official Member
 
Join Date: July 2005
Location: in my house
Posts: 106
first of all i want to be different all you guys do the same thing with your cars and as far as the k member its all taken care of the only thing i am concerened about is wiring are the pins in the computer the same through out the years or what

Whats different? if anything
Reply With Quote
  #4 (permalink)  
Old 01-04-09, 03:20 PM
DBMSTNG's Avatar
I fantasize about it being BIG!
 
Join Date: April 2002
Location: not quite here
Posts: 3,918
your car isn't a special production car. you should be posting in the V6 or 94/95 section.
Reply With Quote
  #5 (permalink)  
Old 01-04-09, 06:37 PM
Official Member
 
Join Date: July 2005
Location: in my house
Posts: 106
well hmmmm lets see
yes i do belive your right

except for one thing this is the only place on here that says 35th anniversary and it is a 99 and it does have 35th emblems sooo.............

wait a minute it must have been made in 1999 when it was the 35th anniversary of the mustang
forget this you people dont even build your own cars you take them to someone else the only thing ya'll can do is put a cold air intake on and then you still need to read the instructions

i'm outy
Reply With Quote
  #6 (permalink)  
Old 01-04-09, 07:52 PM
DBMSTNG's Avatar
I fantasize about it being BIG!
 
Join Date: April 2002
Location: not quite here
Posts: 3,918
Quote:
Originally Posted by 1stanger1 View Post
well hmmmm lets see
yes i do belive your right

except for one thing this is the only place on here that says 35th anniversary and it is a 99 and it does have 35th emblems sooo.............

wait a minute it must have been made in 1999 when it was the 35th anniversary of the mustang
forget this you people dont even build your own cars you take them to someone else the only thing ya'll can do is put a cold air intake on and then you still need to read the instructions

i'm outy
oh ignorance.....

ALL 1999 Mustangs have 35th badges. ONLY the Limited Edition GT's are special production. NOT ALL GT's are Limited Editions. you have niether. this forum is for the SPECIAL EDITION 35th anniversary GT's. you are posting in the wrong area.

wow! how do you know i only know how to install a cold air kit? you must be psychic! hmmm, now if i could just remember how I installed all those mods listed in my sig on my car..... oh, btw, I also TUNED my own car. so STFU!!

don't be a whiny little bitch making comments about stuff you know nothing about.
Reply With Quote
  #7 (permalink)  
Old 01-05-09, 06:50 AM
VOORHEES's Avatar
Founding Member
 
Join Date: November 1999
Location: LaGrange, GA
Posts: 2,756
Reply With Quote
  #8 (permalink)  
Old 01-06-09, 01:20 AM
Slow35th's Avatar
Member
 
Join Date: December 2008
Posts: 34
Quote:
Originally Posted by 1stanger1 View Post
well hmmmm lets see
yes i do belive your right

except for one thing this is the only place on here that says 35th anniversary and it is a 99 and it does have 35th emblems sooo.............

wait a minute it must have been made in 1999 when it was the 35th anniversary of the mustang
forget this you people dont even build your own cars you take them to someone else the only thing ya'll can do is put a cold air intake on and then you still need to read the instructions

i'm outy
Reply With Quote
  #9 (permalink)  
Old 01-07-09, 11:15 PM
Red9935thGT's Avatar
Official Member
 
Join Date: November 2004
Posts: 158
A 21 post newb v6 owner talking trash to senior members in the wrong forum...

Ignorance at its finest, good riddance.

Last edited by Red9935thGT; 01-07-09 at 11:18 PM.
Reply With Quote
  #10 (permalink)  
Old 01-09-09, 06:40 PM
Lolds's Avatar
Member
 
Join Date: March 2008
Location: Seattle area
Posts: 24
Quote:
Originally Posted by Red9935thGT View Post
A 21 post newb v6 owner talking trash to senior members in the wrong forum...

Ignorance at its finest, good riddance.

Agreed. I was just thinking that I never see any trash talking or badmouthing going on in this forum as we are all to mature for that
Reply With Quote
  #11 (permalink)  
Old 01-10-09, 12:02 PM
wythors's Avatar
Old Geezer
 
Join Date: May 2000
Location: C Addle
Posts: 1,344
If you look at this guy's other posts, he's an obvious know-nothing guy who came to the Mustang world from the DSM people. He's tackling a bunch of projects that he knows nothing about and won't listen to what he's told when he asks for information.
Reply With Quote
  #12 (permalink)  
Old 01-21-09, 01:07 PM
MakotoS13's Avatar
Official Member
 
Join Date: June 2005
Posts: 170
aw man, i had no idea i had such a special car! sweet. #100964 of 126,067.

i knew today was a great day.

Last edited by MakotoS13; 01-21-09 at 01:20 PM.
Reply With Quote
  #13 (permalink)  
Old 01-26-09, 12:09 PM
Member
 
Join Date: December 2008
Posts: 7


I kind of understand the defensiveness though. I posted one little thing and got mauled by a bunch of the other members. Still though, wouldn't he just post this in the 5.0 tech forum (or any other tech forum for that matter) or something?
Reply With Quote
  #14 (permalink)  
Old 01-26-09, 12:28 PM
Gearbanger 101's Avatar
SuperMod
Canadian Colossus
 
Join Date: August 2002
Location: Ontario, Canada
Posts: 8,093
Considering the direction it went, the only Forum I plan on moving this one too in the near future is the Deleted Threads Forum.

To the original poster....don't be such a smart ass. You're not going to get any help around here walking around with a chip on your shoulder. This thread would have gotten a lot more useful hits had it been posted in one of the tech sections just as DBMSTNG informed you. As it sits now, its going from an advice thread to a free for all because of your piss poor attitude.

Last edited by Gearbanger 101; 01-26-09 at 12:32 PM.
Reply With Quote
Reply




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


 




All times are GMT -6. The time now is 10:43 AM.