Mustang Forums at StangNet

1st time at track in the cobra

This is a discussion on 1st time at track in the cobra within the SVT Talk forums, part of the SVT category; I went to dragway 42 tonight. first time in the cobra. first time on the qtr with a stick an ...

Go Back   Mustang Forums at StangNet > Mustang Forums > SVT > SVT Talk

Over 151,000 Members!!

Register Vendors Garage FAQ Calendar Search Today's Posts Mark Forums Read



Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1 (permalink)  
Old 08-04-09, 10:53 PM
Official Member
 
Join Date: June 2003
Location: cleveland, oh
Posts: 477
1st time at track in the cobra

I went to dragway 42 tonight. first time in the cobra. first time on the qtr with a stick an 1st time with dr's. best time was 14.21 an fastest trap was 100.66. best 60 was 2.21. i haven't had the car long, the PO said it had 410's. the speedo was off 10 mph when it got it i put a 23 tooth gear in an its right now. I was hitting the rev limiter right before the finish line in 3rd. so now i'm thinking the 410's may be 373's. i also found out the exhaust is hacked. it has a 2.5" 4 cat h pipe, 2.25 flow tubes, 2.5" flowmasters, an 2.25 tails. is this costing me anything? i have a bassani o/r x pipe, what kinda improvement should i look for after installing it? sorry the post is so long, thanks for any input.
Reply With Quote
  #2 (permalink)  
Old 08-05-09, 06:23 PM
32ValveRom's Avatar
Official Member
 
Join Date: February 2009
Location: Fl
Posts: 88
Assuming that you're referring to the 97 in your sig I think an o/r X-pipe should get you more top end power. Also, I have 3.73s in my 99 and I'm right before the rev-limiter in 3rd in the 1/4. You probably should focus on your launching with dr's and your shifting. I think you should be getting somewhere in the 13s. Btw, what kind of 60fts are you getting?

Last edited by 32ValveRom; 08-05-09 at 06:30 PM.
Reply With Quote
  #3 (permalink)  
Old 08-05-09, 07:22 PM
Official Member
 
Join Date: June 2003
Location: cleveland, oh
Posts: 477
60 ft times were in the 2.2's an 2.3's. i think next time i'll soften up the launch. I didn't power shift it. I have an occasional slight grind going into 5th so I wasn't going to blow the tranny an walk home.
Reply With Quote
  #4 (permalink)  
Old 08-05-09, 07:25 PM
slayr281's Avatar
The poster formerly known as slayr420
 
Join Date: June 1999
Location: San Diego, California
Posts: 7,630
What were you leaving the line at? I think that combined with some practice, you could gain a lot of time back from the 2.2x 60s. Down those into the 1.9x and you've shaved .3 there and have yourself in the high 13s.
Reply With Quote
  #5 (permalink)  
Old 08-05-09, 10:19 PM
jeremy canter's Avatar
Official Member
 
Join Date: December 2008
Posts: 158
Garage
my 98 is mostly stock with a o/r x-pipe and a mac cat back and a k&n drop in > I launch at 2700 > and pull a 2.4 60 foot with stock 3:27 gears and run 14.1 at 100 mph and only hit 4th gear once. and I run street tires>
Reply With Quote
Reply




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


 




All times are GMT -6. The time now is 08:28 AM.