Wheel/Tire - Need your info for FAQ

WHEEL & TIRE INFO

gp001 said:
OK Members, I am testing out the usefullness of doing FAQs for the S197 Tech Section. I am going to start with one for wheels/tires. If it proves sucessfull I will move on to other areas.

What I need from all of you with NON STOCK wheels is:

Wheels:
Brand BLINGZ
Model GHOST GT
Wheel Diameter F 20X8.5 R 20X10
Offset F +30 R +37

Did you need/use a spacer? NOPE

Tires:
Brand HANKOOK
Model K104
Size F 255/35-20 R 275/35-20

Suspension Mods if any:Eibach Pro-Kit Spring Set,Eibach Anti-Roll Kit

A picture. Preferably small. Can also be a link if A) it is your car, and B) you have the right to link to that webspace.

The only information I want in replies to this thread is the info above. No "Where'd you buy those", "Those look great", etc. Use PMs or e-mail for that.
 

Attachments

  • 20tys1.jpg
    20tys1.jpg
    61 KB · Views: 825
  • Sponsors (?)


Another piece of information that would be helpful here is whether or not anybody is experiencing any tire rub, especially the guys/girls that have gone wider and lower.

Great resource by the way - MORE PICTURES!
 
Wheels:
Brand: Boyd Coddington
Model: Junkyard Dog
Wheel: Diameter 18 inch
Size:
Front: 18x8
Rear: 18x9
Offset: custom build

Did you need/use a spacer? No

Tires:
Brand: Nitto
Model: NT Extreme 450
Size:
Front: 255/45/18
Rear: 285/40/18

Suspension Mods
Eibach pro-kit

DSC01277.sized.jpg
 
What I need from all of you with NON STOCK wheels is:

Wheels:
Brand: Boyd Coddington
Model: Smoothie II high polished
Wheel Diameter: 18" x 9"
Offset: don't know, I took what they said was the right offset for the 05 GT. they swore it was right and it was. tires are right at the edge of fender.

Did you need/use a spacer? NO

Tires:
Brand: Pirelli
Model: P-Zero Nero
Size: P275/40-18 all four corners

Suspension Mods if any: Steeda lowering coils, approx 1-1/2" drop.

A picture.

http://forums.stangnet.com/attachment.php?attachmentid=44592&stc=1&d=1147460432
 

Attachments

  • river62op.jpg
    river62op.jpg
    43.2 KB · Views: 971
wheels
Brand: american racing
Model: torq thrust II
Wheel Diameter: 18x10 front and back
Offset: 7.25" backspace same for front and back

Did you need/use a spacer? nope

tires
Brand: dunlop
Model: 9000
Size: 285/40/18

stocked out suspension

IMG_2065.jpg

IMG_2061.jpg

IMG_2062.jpg
 

Attachments

  • IMG_2065.jpg
    IMG_2065.jpg
    63.8 KB · Views: 438
  • IMG_2061.jpg
    IMG_2061.jpg
    59.5 KB · Views: 525
  • IMG_2062.jpg
    IMG_2062.jpg
    48.4 KB · Views: 384
--------------------------------------------------------------------------------

Wheels:
Brand: Mustang Tuning (made by Verde I believe)
Model: Anthracite Deep Dish Bullitt
Wheel Diameter: 18"
Offset: (F)18x9 +36mm, (R)18x10 +45mm

Did you need/use a spacer? Yes, 1/4" on the front

Tires:
Brand: Nitto
Model: 555/ DR rear
Size: (F) 255/45/18, (R) 305/45/18

Suspension Mods if any:
Steeda springs, BMR LCA, Relocation brackets, BMR adjustable panhard rod
__________________
 
Wheels:
Brand -- OE
Model -- 2007 Cobra Replica
Wheel Diameter -- Front:17X9 Rear: 18X10
Offset -- Unknown, But look okay to me

Did you need/use a spacer? No

Tires:
Brand Nitto
Model Extreme 555ZR
Size Front:255-45-17
Rear :275-40-18

Suspension Mods if any :None
 

Attachments

  • Modded3.jpg
    Modded3.jpg
    70.9 KB · Views: 658
Wheels:
Brand: AFS
Model: BULLIT
Diameter: 17X9
Offset: 45mm

Did you need/use a spacer? no

Tires:
Brand: YOKOHAMA
Model: ADVAN
Size: 255/45/R17(FRONT):275/55/R17(REAR)
Eibach pro kit lowering
<img src=http://myspace-410.vo.llnwd.net/00975/01/42/975232410_l.jpg>
 
Wheels/Tires

Wheels:
Brand: Verde
Model: Anthracite Bullitt Deep Dish
Wheel Diameter: 18"
Offset: (F)18x9 , (R)18X10
Did you need/use a spacer? No

Tires:
Brand - Nitto
Model - 555
Size - (F)265/40/18, (R)285/40/18