4.6 newb....im from the fox 5.0 side of stangnet

  • Sponsors (?)


Jay Leno spoiler looks great! :). How did you manage to get it flush with the front bumper??? Mine sits about a 1/4 inch in, in the center!?!?!

I put the bolts in the slots on the sides and snugged the up enough to where they would slide then I moved to the front and center Made sure the sides were even when i pulled the spoiler out to the edge of the bumper and i drilled and installed the first center bolt. then i worked my way toward the outsides from the middle installing one to left of center then one to the right. One to left one to right So on and so forth. Making sure I kept the front edge lined up as I went.


Sent by Siri using Tapatalk
 
Should read RICE RIDE on the license plate.
My opinion looks like hammered dog :poo:.
I give it TWO Thumbs DOWN. would be more but only got two hands.
31952303_cb12d09d45.jpg
 
How did you manage to get it flush with the front bumper??? Mine sits about a 1/4 inch in, in the center!?!?!

He started at the front center. Most people line up the spoiler's edge with the wheel well and work from there. If you check the side pic you can see the edges aren't lined up.

It looks fine though, whichever way you go.

Those deep dish mach 1 rims are awesome by the way.
 
He started at the front center. Most people line up the spoiler's edge with the wheel well and work from there. If you check the side pic you can see the edges aren't lined up.

It looks fine though, whichever way you go.

Those deep dish mach 1 rims are awesome by the way.

Yeah it was a trade off I wanted it lined up on front edge.


Sent by Siri using Tapatalk
 
what? You don't like my car?

Sent by Siri using Tapatalk
Sorry Droptop I dont like it? An bein yeller doesn't help. :) LOL
He started at the front center. Most people line up the spoiler's edge with the wheel well and work from there. If you check the side pic you can see the edges aren't lined up.
That's how.I did mine. Found center on the chin spoiler and the center on the bottom of the front bumper. An flushed it up in the center front. Then worked my way out on both sides. Drilling holes an bolting it out towards each front tire. Now the spoiler doesn't reach the front finderwell? But had to have a trade off. To get it flush in the front. Plus I have the 01' Cobra bump on mine also.
facebook_766772956.jpg
 
  • Like
Reactions: 1 users
Sorry Droptop I dont like it? An bein yeller doesn't help. :) LOL

That's how.I did mine. Found center on the chin spoiler and the center on the bottom of the front bumper. An flushed it up in the center front. Then worked my way out on both sides. Drilling holes an bolting it out towards each front tire. Now the spoiler doesn't reach the front finderwell? But had to have a trade off. To get it flush in the front. Plus I have the 01' Cobra bump on mine also.
facebook_766772956.jpg

Mine doesn't have a riced out body kit lol. Someone with administrative powers changed my post for fun. If you look at the plate on front of the yellow body kit it says Ontario I'm in indiana.


Sent by Siri using Tapatalk
 
Ok. I like that one Droptop. I like the mach rims. Still not hip on the yeller? But still is a slick stang bro.
thanks. The yellow has really grown on me. I like it a lot more now then when I got it. If you read through the thread from beginning you will learn how I acquired this car.

My name is Shawn also. Lol


Sent by Siri using Tapatalk