So I have a PI motor swap and today at work I tried to start it on my way back from lunch and no crank, just heart a click from the starter, I went to pop the hood and wiggled the negative cable went to start it and cranked right up. Yes my terminals are on tight however the ground on the negative cable that goes to the block isn't completely tight but it is making contact with the threads on the bolt, what's going on.
Also I am missing the ground from my block to chassis so idk if that would be a cause but I've been driving my car perfectly fine for the past 2mo
Sent from my SGH-T989 using Tapatalk 2
Also I am missing the ground from my block to chassis so idk if that would be a cause but I've been driving my car perfectly fine for the past 2mo
Sent from my SGH-T989 using Tapatalk 2