Progress Thread Project Copper Can
- Thread starter MikeH686
- Start date
-
Sponsors (?)
I am waiting on this house I'm getting ready to buy it has three garage spaces
Yeah two are attached to the house and one is deprecate from the house which in all actuality I could put two cars in there but one door so it will be where I actually have all my tool and stuff
+1 on the sc wheels.....i got them....lots of nice wheels to choose from but where im from havnt seen many sc wheels around,i get a few complaments also from tome to time....I like the SC wheels but those are not for everyone.
The set of wheels I would be thinking hard about for your car are the Magnum 500 remakes.
AM carries these as well as a few others. No idea if you like this sort of thing or not.
There's another Magnum 500 remake out there that has much smaller openings. I'm not as much of a fan of those since you can't really see the calipers through the small slots.
yours my look good with chrome wheels also though...
View attachment 117910
They should fit the heads just fine. The valve cover bolts are a standard size. (The bolts I sent are the ones that come with the covers)
personally im not a chrome guy either,was just a thought...lol...
im a painter,i had every color avalable to me,coudnt decide for days....almost painted it same color as yours though,looks good i see....ended up tweeking the emerald green a litte though
im a painter,i had every color avalable to me,coudnt decide for days....almost painted it same color as yours though,looks good i see....ended up tweeking the emerald green a litte though
I like the emerald green that's the color of my truck black until you get up on it and see it's green
So it was nice enough outside yayyy!!! Hurray yayyy... So I started getting the new covers furnished by nick @84Ttop and powder coated by custom funchionz. So on with some pics.
The drivers side was a pain in the azz because of the heater tube.
This is how I routed the hoses for the catch can setup couldn't run them up in parallel with the end tank but I just did the same to the passenger side to make it symmetrical.
Here's the catch can it's in the passenger wheel well yes I know I may hit them with my tire if I do I will replace the straight connectors with a set of 45? Fittings
Here's how the hose was run over to the can I attached two hose seperators one by the valve covers really actually behind it and one close to the hole where the hoses pass through.
The drivers side was a pain in the azz because of the heater tube.
This is how I routed the hoses for the catch can setup couldn't run them up in parallel with the end tank but I just did the same to the passenger side to make it symmetrical.
Here's the catch can it's in the passenger wheel well yes I know I may hit them with my tire if I do I will replace the straight connectors with a set of 45? Fittings
Here's how the hose was run over to the can I attached two hose seperators one by the valve covers really actually behind it and one close to the hole where the hoses pass through.
Similar threads
