Thanks for the bump, I actually did do some work. The engine bay was finally resprayed last night, and it looks terrible. I'll redo it at some point in the future with the Scott Rod panels.
I'm still waiting on my bonus. Friday, I finished my end of the 'deal' that would make me eligible for it, so.... I should have it in 2-3 weeks, which will prompt ordering the Megasquirt system. So tired of waiting....
Next up is the K-member re-install and brake system plumbing. I also need a lot of hardware for suspension, i.e. bolts for struts and rear control arms. @Sharad - don't y'all sell bolt kits?
Also need to weld the trunk pan back in to hang the gas tank and plumb the fuel lines which I haven't
bought either.
Next up is the K-member re-install and brake system plumbing. I also need a lot of hardware for suspension, i.e. bolts for struts and rear control arms. @Sharad - don't y'all sell bolt kits?
Nah I've accepted it for what it is. Moving on with it and I'll redo it on a rainy day.Seriously??!! What is the major malfunction? The fender aprons? Do yourself a favor, and Google pics of the guys that have riveted ScottRod panels on. Get a set, trim them to fit ,drill them for the rivets (use screws or Cleco's to hold in place so you can drill all the holes) paint them, cut out the offending stuff and rivet those bit ches on.
Been engaged a year, got a joint account. So it is 'our' money. And I'd be pissed if she went out and dropped $200 without telling me. We've been on a tight budget lately, so communicating is key.The day you have to ask for permission is the day your life as you know it is over. This is especially true cause you ain't married, but you are starting to act like you are. Scary stuff indeed.
Well, I did not know you were engaged. So shame on me. As always I was trying to be a smart azz, so please don't take it personal. I thought it was funny. Anyhow, carry on and feel free to ignore my lame attempts at humor.Been engaged a year, got a joint account. So it is 'our' money. And I'd be ****ed if she went out and dropped $200 without telling me. We've been on a tight budget lately, so communicating is key.
No worries man, I knew you were kidding!Well, I did not know you were engaged. So shame on me. As always I was trying to be a smart azz, so please don't take it personal. I thought it was funny. Anyhow, carry on and feel free to ignore my lame attempts at humor.
I tried several bits, several sizes from 2 different indexes. It's entirely possible that all my bits need to be sharpened, so I'll pick up another index, but I just couldn't get anything to cut into the broken bolt.Progress at least right? You couldn't drill and tap the bolt?
Look into cobalt bits. Worst case you can use carbide, but if you break one of those off you are totally screwed because they are too hard to drill through.I tried several bits, several sizes from 2 different indexes. It's entirely possible that all my bits need to be sharpened, so I'll pick up another index, but I just couldn't get anything to cut into the broken bolt.