mach 1 gauge cluster facia

[redlordamazon]

does anyone know if ford sells the silver face from the mach1 seperate or do you need to buy the whole cluster gauges and all. i figure that the face and lense are attached/ one piece and that it would be sold seperate if anyone knows i would appreciate it. thanks

 

[keepsbreakin]

It is only a cover. You can get one from Ford or a bunch of aftermarket places. It is the instrutment bezel. I took one from a '99 35th aniv. GT, which is silver, and rubbed off the lettering on it. If you want the Mach1/Bullitt gauge faces, they are not available yet from anyone. I have been looking for awhile. The whole cluster is 350-400 bucks at Ford. They don't sell just the faces.

 

[Solid Snake]

I Painted mine myself. Cost me $5 as opposed to the $60+ for the OEM peice. Looks just as good.

 

[redlordamazon]

did the letters come off easy and how does it look when they are off did they leave a image? thanks for the reply's

 

[keepsbreakin]

No it left nothing. I used some 3M Adhesive remover/cleaner in the red and white can and rubbed it off. You could also paint it. That is a good way to do it. I recently painted the console and bezel for a friend with the "hammered" aluminum paint. It looks awesome. Gives it a natural aluminum look.

 

[01GT eibach]

Sorry for the (likely) stupid question, but you had to dremmel off the clear plastic cover then glue it back, right? If so, how'd that go? Any hiccups you'd like to pass on? I have a carbon fiber bezel cover I was going to put on when I did gauges, but I didn't know then the cover was glued.

 

[68 & 00 GT]

I bought a 35 anniv, and it was $17 from the Ford dealer. I just left the 35 anniv lettering.