Pimp your '93 Cobra's..Lets see em!

Blown93Cobra

New Member
Dec 10, 2003
20
0
0
Show Off your '93 Cobra's..Lets see some pics!

Here is my ride!

488112_1_full.jpg


488112_2_full.jpg


488112_3_full.jpg


488112_4_full.jpg


488112_5_full.jpg
 
  • Sponsors (?)


stallion98gt said:
nice car..how much HP/TQ r u putting dow nwith ur KB ?

Thanks,

I have not had it to a dyno yet. KB claims a 50% HP increase with just the SC alone. With the Bassani Exhaust and K&N filter I am hoping to make around 366 rwhp. I'll find out in the spring.
 
This is an old picture but it's the only pic of my car that I have in the computer. It's #942. I have an 11psi Procharger on it. Mac 1 5/8 long tube headers, 2 1/2" high flow cats, and two chamber Flowmaster mufflers, 2 1/2" out the back. It has a Tremec 3550, Moser 31 spline axles with 3.73's. It now has a 2 1/2" cowl hood too.
 

Attachments

  • Cobra 1.JPG
    Cobra 1.JPG
    41.5 KB · Views: 118
Steve,

The Snoppy in the front yard gave you away. I know who you are now. I would post a good pic of mine on here but I wouldn't want to steal your thunder just yet! 366 RWHP? I hope you can do better than that or you will be spending some big bucks after we go to the dyno this spring !!!!!!!!
 
crazydave said:
Steve,

The Snoppy in the front yard gave you away. I know who you are now. I would post a good pic of mine on here but I wouldn't want to steal your thunder just yet! 366 RWHP? I hope you can do better than that or you will be spending some big bucks after we go to the dyno this spring !!!!!!!!

Hey Dave,

What's up. It took me a minute to figure out who you were! Yeah, I have been gathering a few new pieces here and there. We'll have to wait and see how they add up in the spring. I know you usually go up in the Cleveland area to dyno but me and a couple of my friends are thinking of trying Bigshot Dyno in Hudson. Have you heard anything about them? Talk to you later.

Steve
 
Steve,

Steve,
I have heard about the dyno in Hudson, but I have not heard of his abilities. Jerry from Ford chip is about the best there is, he helped with the 03 Cobra for Ford. Ask in the power adder forum here and the Corral to find out what you can. Steve and Jerry charge one flat rate to burn a chip, no matter how many pulls on the dyno and how long you are there. I have been on and off 4 times in one day, and made 10 pulls for no extra charge. Most places charge you per pull on the dyno so beware. Let me know what the scoop is. If you need any 93 Cobra info or help I probably have the answer for you.


Dave