Ok, I have edelbrock electric choke 600cfm and a performer 302 on the car. I started it up this morning for the first time with it on and it doesnt stay running. and when it does it stays at about 2500-3000 rpm's.
I also have a vacuum leak and dont know where these hoses go to and if I have a place for them to be plugged in on the edelbrock carb
I thought I had read the manual to understand that I dont have to tune it right out of the box and that its tuned to stock calibration?
Plus there is a tiny bit of smoke coming from the carb/intake joint area?
I also have a vacuum leak and dont know where these hoses go to and if I have a place for them to be plugged in on the edelbrock carb
I thought I had read the manual to understand that I dont have to tune it right out of the box and that its tuned to stock calibration?
Plus there is a tiny bit of smoke coming from the carb/intake joint area?