E-Cam work for turbo use?

[MustangGroupie]

I have some mods including the e-cam. Purchased a holset e-1? (64 trim compressor side, has a 127 A/R) Was wondering if there would be any overlap problems using that cam and turbo setup. Any comments appreciated.

 

[JadeFalcon]

if you going turbo then you need to go with a custom grind, talk to bennet cams, they can custom grind you one for 280 dollars.

 

[Mike86Stang]

Yep...E-cams as well as F cams have been in turbo stangs with good success...shouldn't be an issue

 

[JadeFalcon]

http://www.bennettracing.com/products/camshafts.html

 

[MustangGroupie]

Yep...E-cams as well as F cams have been in turbo stangs with good success...shouldn't be an issue

Is the Performer rpm to much for a mild turbo setup?

 

[5.0 HOtrain]

Christ, the stock cam works sweet with a turbo too. Good luck and hang on once the install is done.
mike.

 

[MustangGroupie]

Christ, the stock cam works sweet with a turbo too. Good luck and hang on once the install is done.
mike.

Performer rpm intake I mean, Yeah i heard the stock cam is good do to lack of overlap, But i dont feel like taking the bitch apart again until i do heads.

 

[Mike86Stang]

Is the Performer rpm to much for a mild turbo setup?

Are we talking the RPM Heads or Intake ?

Eigther way it'll be fine (intake or heads), just think of it this way... the more efficent it is NA the better the turbo motor will be. A little overlap won't hurt especially with lower boost levels, but once you start talking high boost then you need to be mindful of it(overlap)