SVO BALLJOINTS!!!

[latroca1]

cAN SOMEBODY TELL ME IF THE FRONT LOWER BALL JOINTS CAN BE CHANGED OR DO I HAVE TO REPLACE THE WHOLE CONTROL ARM??

 

[chaka]

I have read that you need to change the whole thing.

Also the SVO control arms are the same as some Lincoln control arms.

 

[DRAGPAK]

SVO BALL JOINTS

YOU MUST CHANGE THE HOLE ARM . OR YOU CAN DO THE SN95 SPINDEL SWAP YOU WOULD GET BETTER BRAKES AND A LOT EASER TO GET PARTS AND TIRE AND RIM COMBOS

 

[Pro-Hawk]

They are non replaceable ball joints on a stock SVO. They same ball joints came on a 82-84' Linclon so you may get lucky and find some but becareful most people want your first born for a set. (Keep in mind a SVO was made with shelf parts) Also there is a set right now on Ebay for sale I'm not sure how good of condition they are in. There is a few ideas on how to deal with this on SVOCA like the SN95 swap. So fair they got a set of aftermarket lower A-arms with changeable ball joints out for the SVO's but people are still waiting for them to be fully tested out. They run around 750.00 plus 7% shipping. They come with a common 94' Linclon type replaceable ball joint.