Whos close to 300rwhp

[jghood13]

Who's combo has brought them close to 300 rwhp and what h/c/i combo did you use?

 

[KG94GT]

jg,

Last dyno approx 3 months ago was 260 rwhp with 300lbs torque. GT40 crate, TFS upper and lower intake, e-303, aluminum heads, cai... Just added an aluminum driveshaft but more importantly, I'm going to have a chip, (diablo) burnt for it and some under dive pulleys added. Dont think I'll hit 300 but hope to be pretty close. Stock injectors and maf. Won't be long before I'm there!

KG

 

[VIPERn94Five-0]

check the FAQ at the top of the page....there are a bunch in there.....



Anthony

 

[VIPERn94Five-0]

jg,

Last dyno approx 3 months ago was 260 rwhp with 300lbs torque. GT40 crate, TFS upper and lower intake, e-303, aluminum heads, cai... Just added an aluminum driveshaft but more importantly, I'm going to have a chip, (diablo) burnt for it and some under dive pulleys added. Dont think I'll hit 300 but hope to be pretty close. Stock injectors and maf. Won't be long before I'm there!

KG

what type of dyno was that?? i would have expected more from the GT-40 crate motor with a TFS intake.....


Anthony

 

[Rootus]

I'm right at 300 rwhp (have dyno'd above and below), my basic combo is AFR 165's, FTI custom cam, Edelbrock intake, and I've got all the rest of the normal bolt-ons (MAF, TB, pullies, exhaust, etc).

Dave

 

[TMC]

I made 336 rwhp with TFS heads, Holley intake and an Earson cam...I posted the majority of the combo here somewhere...I'll try to dig that post up for ya.

 

[jjd975]

292/315 here. Edelbrock heads, TFS street, and Crane 2031 cam.

 

[final5-0]

See the sig!

Later
Grady

 

[jwalker]

292 HP

 

[Grn92LX]

292 HP

What have you changed or done? Last I saw you weremaking low #'s with your tfs set up, what fixed it?

and see sig for my 300+ combo

 

[Pops Fun]

Hi,
281rwhp

TFS TW Heads, Steeda 19 Cam, Cobra Intake, FMS 65mm T/B, Pro-M 75MM MAF, Steeda 24# injectors, H&S 1.72 Roller Rockers, MSD 6al, Blaster coil, Walbro 255 LPH

DYNO
http://members.nuvox.net/~zt.steveh/mustang/dyno2.html

Added High Flow cats hoping to be closer to 300

Steve

 

[twotonefreak]

After I get my new MAF and MAC LT's I am gonna hit the dyno again and hope to be right at 290 maybe 300 with some tweaks. Mods in sig

 

[stangla2]

292.8 rwhp and 315.9 rwtq w. AFR 165 and 306 block, e-303 cam and stock cobra intake, 3.73s

 

[Killercanary]

293rwhp/328rwtq

AFR 165's, FTI cam, Edelbrock performer intake, bolt-ons on stock short block.

 

[KG94GT]

Dyno results?

Viper,

I too am disappointed with the dyno results for my crate motor. I know there is several different types of dynos, so I'm told and I don't know what type it was, Sorry!

KG

 

[mto502]

280/311 torque, but found out yesterday how rich I'm running. We'll see what it is when I figure out how to get all this sorted out.