2.3 vs 5.0 pedal assembly

[01PonyGT]

Are the 5 speed pedal assemblies from the 2.3 cars interchangeable with the ones from the 5.0 cars?? I'm gathering parts for my eventual A4LD to T-5 swap and have come across a lot of pedals from 5.0s, but not many from a 4 cyl. Does it matter? I've heard yes and I've heard no; which is it? Anyone put a 5.0 assembly in their 2.3 mustang?

Thanks,
WES

 

[mikeflys1]

They're the same.....I even used one from an sn95 v-6 which I'd actually recommend doing because its much easier to get it back in there.

 

[spook]

It took me about 5 seconds to fit the SN95 pedal assembly up and bolt it in.

 

[01PonyGT]

So any pedal assembly will fit, even from an SN95? Any problems using these pedals? I know that I read somewhere on some website that there were problems with the clutch depressing enough if a 4cyl assembly wasn't used. I guess I have to just bolt it in when the time comes and see what happens.
More responses from those that have swapped would be great.

Thanks for the replies,
WES

 

[spook]

So far I've had no problems. The only downside is that the fox body pedal assembly helps to hold the steering wheel in place and the SN95 doesn't.

 

[Asha'man]

Will a Fox pedal assembly fit in an SN95? I have a buddy with a '98 V6 who's thinking of T5 swapping and he's drooling over my low-cost swap....we have lots of Foxes in our local junkyard, so I'm wondering about that.

Ash

 

[spook]

The SN95 set had little spacers to keep it set off the firewall about a hlaf inch. I don't think a Fox pedal assembly would work without the spacers.