SCT tune by Aric @ Team Ford of Marietta

[DirtySanchez]

The graph speaks for itself! Check it out:

All that with a little tuning. If you're in Atlanta, and you need a tune, give Aric a call at 678-449-6871. He does SCT tuning, so you get a handheld flasher that holds 3 tunes, and you can switch between them.

 

[2k1Cobra]

what kind of mods are getting you that 299hp?

 

[Lsredy2kstang]

A radical drivetrain for starters with 4.56 and the Viper t-56 I know! The rest he will have to tell ya!

 

[DirtySanchez]

what kind of mods are getting you that 299hp?

I pulled 304/301 with these mods:

Steeda underdrive pullies
C&L MAF
Flowmaster weldins
MAC prochamber

Since then, I've added/swapped:

T56 transmission
4.56 rear
MAC catted H

The tranny/rear/cats dropped me quite a bit, as you can see from today's baseline, but Aric got most of it back with the tuning. I bet I'd be over 310 now if I still had the prochamber and stock rear.

 

[VIPERBLUELX]

What's the line at 4,200 for ?

 

[DirtySanchez]

What's the line at 4,200 for ?

It shows the difference between the two runs at 4200 rpm, so you can see the midrange gains as well as the peak. I only picked up 6 hp at peak, but I got 17 at 4200 rpm.

If you're curious, here are my dyno run files:

DYNORUN.009
DYNORUN.012

And here's a link to the dynojet run viewer:

http://www.dynojet.com/viewer/RunViewer7.0.1.0.zip