New Kenne Bell photos

[neoclasiccl]

I added a few things since the original install last week. One being my bling bling bbk inlet pipe. I didn't get it for looks thou it was to keep the MAF from banging around with the stock plastic inlet pipe. I also added a non slip pulley since the stocker was making lots of belt dust. I did notice some belt dust after installing it but that went away after a little while. I guess the belt needed to break in first.

Here are the pics enjoy And yes the time is wrong on my camera LOL.

 

[JonJon]

engine so big
and that
BBK pipe is gigantic!!!!

 

[Cobra5337]

Pics look nice man. Let us know what you think of it after you get a feel for it.

 

[drexebo]

I'm likin' the bling bling... That is tha sheezy fo shiggity right thurr!

 

[neoclasiccl]

I'm likin' the bling bling... That is tha sheezy fo shiggity right thurr!

LOL you guys are too funny.

The BBK is exactly the same size as the 105mm accufab big oval throttle body that's why it looks so big

 

[neoclasiccl]

Pics look nice man. Let us know what you think of it after you get a feel for it.

will do I am taking it easy until I learn how the car responds. The 315 drags light up in three gears now so I need to learn how to pedal and lift the throttle to keep it going straight.

 

[Cobra5337]

Just out of curiousity how much did it cost you to get those kind numbers because the kenne bell is the s/c that I really want to buy in the future if this turbo thing doesnt work out.

 

[snoopy98]

did you ever change out your exhaust or are you still riding around setting of alarms. hehe

i see you gained about another 40 rwhp since last time i talked to you.

 

[neoclasiccl]

Just out of curiousity how much did it cost you to get those kind numbers because the kenne bell is the s/c that I really want to buy in the future if this turbo thing doesnt work out.

$3799 for the blower and Boost a Pump
$500 for 55lb injectors
$300 for inlet pipe
$140 for non slip pulley
$110 for 90 mm idler
$105 for 2 90 mm lower idlers
$368 for big oval throttle body
$489 for Dr. Gas xpipe
$410 for magnaflow catback
$750 for Gords heat exchanger
$400 for Pro-m 92mm throttle body
$350 for install
$500 for dyno tune

There were a few other little things I did like guages to keep an eye on things but this project was about $9000 including the guages shift light and misc stuff. the car could have easily made 630-640 but I wanted an extremely safe tune since this is my daily driver. After I get the stronger short block I plan on pushing 700hp +

 

[Cobra5337]

Thanks a lot man I hope that some day I can put the k/b on my gt!

 

[Halcyon_Dolour]

Oh dear, it appears that my wee-wee has been stricken with rigamortis.

 

[neoclasiccl]

Thanks a lot man I hope that some day I can put the k/b on my gt!

Wait for the 2.2 ltr and build a nice short block

 

[neoclasiccl]

Oh dear, it appears that my wee-wee has been stricken with rigamortis.

You should see the middle of my seat where the cloth is getting pulled up from the butt check pucker factor from WOT blasts

 

[neoclasiccl]

**double post**

 

[02 Sonic Blue]

the polished version would look sick on that engine. dont get me wrong though, your setup looks incredible, nice work have fun with it.

 

[neoclasiccl]

the polished version would look sick on that engine. dont get me wrong though, your setup looks incredible, nice work have fun with it.

yeah it would have looked sweet but for the price difference I am putting that money elseware

 

[GraGhst]

Man I can't wait till I get my Kb, I'm a little over half way there. It'll be nowhere near you but I'm hoping for 400-430 to the ground with the safe tune from Kb, cause just like you I don't want to blow my daily driver.

 

[snoopy98]

hey you ready to make some road video's.

 

[JimC]

LOL 550+ HP my daily drive. You got to love it...

 

[Beau]

gorgeous. don't ya love how the 4V engine takes up that space in the engine bay?