HOW MUCH FOR A DYNO READING?

[StangerZipper]

how much would it cost to dyno out my car?
Also can the dyno shop test out your top speed, 1/4 mile time and speed?

 

[98GTfromGA]

On average, $60-$75 for two or three pulls with A/F reading.

 

[2K1GtfromSC]

$40-50 for 3 pulls w/tail pipe O2 reading. Not sure about the 1/4 mile times, just take it to the track for real times

 

[M1 Stang 04]

where can Dynos be done at?

 

[2K1GtfromSC]

where can Dynos be done at?

A shop has to have a Dynojet or a mustang dyno. Just check around and see who has one.

 

[Phoenix00GT]

Here's a place in your area:
2d's Performance
438 North Kingston Square
Lake Charles, LA 70611
Phone : 888-544-4626

 

[lman657]

HEY GUYS, is there any in colorado that you know of, been there?

 

[CottonBurnerz]

around here is't $45 for 3 pulls with a/f graph

 

[Firemanz]

around here is't $45 for 3 pulls with a/f graph

Not bad. The norm here is 2 pulls with A/F graph for about $60.............

 

[GTvert01]

where can Dynos be done at?

Don't end a sentence with a preposition. Around here you can get 3 pulls for $60 or rent it by the hour for around $120.

 

[Gray02GT]

HEY GUYS, is there any in colorado that you know of, been there?

PMI in fort collins has one. I plan to get dynoed there because its the only one I know of.

 

[lman657]

PMI in fort collins has one. I plan to get dynoed there because its the only one I know of.

Hey, any idea what they charge for a couple pulls, or whatever?

Thanks!

 

[Gray02GT]

Not completely sure, it isn't very expensive, and they do have "dyno days" a lot where I think they give you 1 or 2 pulls for as cheap as $20.

 

[StangerZipper]

Hey, any idea what they charge for a couple pulls, or whatever?

Thanks!

what kind of heads do you have? stock? aftermarket
?

 

[jas142]

Most shops are like $40 for a pull

 

[lman657]

what kind of heads do you have? stock? aftermarket
?

Hey, they're ford PI (performance improved) heads, which is what they put on the 1999 and newer gt's. They are from ford, as nobody has come out with an aftermarked head. Many guys are doing the headswap and seeing around 40 horsepower with just the headswap (which include the cams in the heads and everything)

Hope that helps,

Lance

 

[SonicB]

quoted $95 for a pull yesterday.

$175 an hour for tuning.

here in jacksonville, fl.