Hello everyone. I want as many suggestions as possible, because I can't think of whats best. My Mach just doesn't seem as fast as when I first drove it around, I don't feel that "Pull" anymore. With $2000, what do you guys think I should do to get that great "Pulling" acceleration feeling back?
What should I do w/$2000 and a Mach?
- Thread starter Mach428
- Start date
-
Sponsors (?)
Joe 5.0
Founding Member
DOHC's love steep gears, I'd say get 4.10's, nitrous, and dr's at the least. Or save up a couple grand more and get the new turbo kit from PTI.
http://66.70.20.245/store/Scripts/prodView.asp?idproduct=120
http://66.70.20.245/store/Scripts/prodView.asp?idproduct=120
If you can do the work yourself i'd say full exhaust w/ lts, gears, and control arms...you should still have some left over for beers for the weekend install
KJ Hoppus
New Member
quiksilver98
New Member
GoBabyVroommm
Active Member
Save your money for a rear end or a short block honestly. I heard HEARD that those Mach 1s short blocks can't hold to much power. With slicks a lot of people blow rear ends on those cars.
I know it won't make your car faster but when your friends are blowing there motors or rear ends you'll totally say it was worth buying.
I know it won't make your car faster but when your friends are blowing there motors or rear ends you'll totally say it was worth buying.
damacman
Member
I'll also agree with Zinc03GT, only I'd use the Bassani Mid Length headers because they're easier to install, are more ground clearance friendly, and you can still get the tranny out if you should need to w/o removing the headers. 4.30s may SOUND really steep, but if I had to do it all over again, I'd of sure used them versus the 4.10s in my 5-speed 2k3 GT. . .
decoy562
New Member
Do you have an auto or manual, is there ANYTHING done to it?
Personally, I'd say you're not far AT ALL from a supercharger kit, especially if you could get lucky enough to find a new one. I'm not sure if its possible, but it'd be cool if you could fit one of the stock take off blowers from the highly modded 03-04 Cobras onto your Mach
Gimme so more info, and let us know what you're looking for, THEN I'll throw my suggestions out there
-Will
Personally, I'd say you're not far AT ALL from a supercharger kit, especially if you could get lucky enough to find a new one. I'm not sure if its possible, but it'd be cool if you could fit one of the stock take off blowers from the highly modded 03-04 Cobras onto your Mach
Gimme so more info, and let us know what you're looking for, THEN I'll throw my suggestions out there
-Will
![MAC[H]Z](https://opt.stangnet.com/unsafe/https://cdn.stangnet.com/data/avatars/s/63/63366.jpg?1322928992){kind=avatar}
decoy562
New Member
TARZAN said:Do you have an auto or manual, is there ANYTHING done to it?
Personally, I'd say you're not far AT ALL from a supercharger kit, especially if you could get lucky enough to find a new one. I'm not sure if its possible, but it'd be cool if you could fit one of the stock take off blowers from the highly modded 03-04 Cobras onto your Mach
Gimme so more info, and let us know what you're looking for, THEN I'll throw my suggestions out there
-Will
I don't think it would work with the Mach 1 hood Will
-Chris
The Car is a Bone Stock 04 5spd Mach, Last night I ordered a Magnaflow catted X, Magnaflow Packs and the MIL Eliminators. So far thats where i'm at, Got it all From stangnet Partsshopper for $800. I ordered it at 1:00am and they shipped it at 9:00 am that same morning, great service! $1200 more to go.
Similar threads
