Forged Block

[Zinc001]

Had T&J Performance install a new forged block in my stang and tune it. Very pleased with the results.
Here's a graph...details are in the link in my sig.
Doug

 

[WhiteDevil69]

Had T&J Performance install a new forged block in my stang and tune it. Very pleased with the results.
Here's a graph...details are in the link in my sig.
Doug

Couldn't ask for a better tq curve, that is a SICK ass car man, all you need now is the saleen front bumper!

 

[2001Saleen181]

How much was the total cost, if I might ask...

 

[2001Saleen181]

By the way, awesome graph..

 

[Zinc001]

How much was the total cost, if I might ask...

I would have to work it out as I had other work done at the same time. "Roughly" it would be around 6~7K for the engine with all the bells and whistles installed and tuned with a new clutch and flywheel and 42 lb injectors.

 

[2001Saleen181]

Thanks for the info. I know I'm gonna need a new block soon.

 

[Zinc001]

Thanks for the info. I know I'm gonna need a new block soon.

Running that kind of HP...yup just a matter of time

 

[GinoGT]

Damn, I wouldn't expect a curve like that to come out of a little centri.

 

[DeadLurker]

Anyone notice how far Doug lives from T&J?

 

[GinoGT]

Anyone notice how far Doug lives from T&J?

 

[2001Saleen181]

Did you change the compression on that motor so you can put more boost or did you leave it at the stock level?

 

[Zinc001]

Did you change the compression on that motor so you can put more boost or did you leave it at the stock level?

Lowered it with 18cc pistons...running 12.5 lbs boost up here in the cool air.
And ya I'm nuts...live 2560 miles from T&J

 

[2001Saleen181]

I don't think your nuts, just a die hard mustang nut.

I'v also been thinking about driving down and letting them do my motor also.

How long did it take them? From drop off to drive off.

 

[DeadLurker]

I don't think your nuts, just a die hard mustang nut.

I'v also been thinking about driving down and letting them do my motor also.

How long did it take them? From drop off to drive off.

where you from?

 

[2001Saleen181]

I'm Stationed at Dover AFB, But I mainly grew up in Omaha, NE.

 

[Zinc001]

I don't think your nuts, just a die hard mustang nut.

I'v also been thinking about driving down and letting them do my motor also.

How long did it take them? From drop off to drive off.

Took one week, but they had the short block pre built and all the parts I wanted ready in advance.

 

[2001Saleen181]

Took one week, but they had the short block pre built and all the parts I wanted ready in advance.

Do they have a dyno at there shop? Or did you have to dyno it some where else.

 

[DeadLurker]

Do they have a dyno at there shop? Or did you have to dyno it some where else.

They got a dynojet