Where can I get used TURBOS?

[haulbalz]

Where can I get some turbos for a twin turbo setup? Also, what size and other misc. parts would i need to make it work? Thanks for your help guys.
P.S. 1105- how is your setup comming along?

 

[TwinTurbo93]

Junkyard, ebay, www.turbomustangs.com

For Twins IHI T3's from turbocoupes work well, your going to need headers, intercooler, piping for air intake and discharge, downpipes, lots of stuff. This will get you started http://www.turbomustangs.com/forums/forumdisplay.php?s=&forumid=15

If you have no idea what your doing just buy a complete turbo kit. They are easy enough to find used.

 

[haulbalz]

thanks man

 

[1105]

yea man check out turbomustangs.com and go to the classifide section and post a wanted add. I'm running two Garrett T3's .60/.63. For intercoolers I'm running two 1G DSM intercoolers one behind each foglight hole. Although they are pretty small, then are pretty thick. Heres a quick little list of parts you'll need

Turbos, Wastegates (if the turbo didnt come with one), Actuators (if the turbo didnt come with one), Piping, Shorty Headers, Upgrade your fuel system, Blowthrough MAF, clamps, hoses, fittings, oil feed/drain lines. I'm sure theres some things I'm forgetting, but check out the DIY/JY TT sticky at the top and do a search on turbomustangs.com and you will find a lot of usefull info. My car should be running and complete in a few more weeks. If you want, you can hit me up on AIM - GT1105

 

[cb18201]

you can probably use turbos off talons an eclipses, idk if they are to small or not. go to www.dsmparts.com they have all sorts of turbo stuff.

 

[1105]

you dont want to run .42/.48 turbos on your car... They are just too small. Upgrade the compressor housing if you end up buying thoes.