? for those with 4.10s and a 470rw

[KJ Hoppus]

what rpm are you at going through the traps in 3rd gear?

 

[Dark Knight GT]

I do not have my 4.30 gears installed yet so I can not comment on trap speeds with them. However, in addition to what information these guys can give you, I think what you need to use is a good gear calculator. Here is one right here:

http://www.tchracing.com/tech/gearc...eed&givenval=&givenvaltype=RPM&selectedgear=3

 

[KJ Hoppus]

I do not have my 4.30 gears installed yet so I can not comment on trap speeds with them. However, in addition to what information these guys can give you, I think what you need to use is a good gear calculator. Here is one right here:

http://www.tchracing.com/tech/gearc...eed&givenval=&givenvaltype=RPM&selectedgear=3

thanks, but iv used 3 different gear calculators from 3 different places and i got a different rpm from each one. so im looking for real experience from people. i did a couple searches, but nothing on this exact information. thanks for your help.

 

[Dark Knight GT]

thanks, but iv used 3 different gear calculators from 3 different places and i got a different rpm from each one. so im looking for real experience from people. i did a couple searches, but nothing on this exact information. thanks for your help.

Well, I'm trying to think of someone who has an automatic thats running 4.30 gears in the rear. I know plenty with 4.10's like RacerGT, Roque, Flo Bee, and others but none with 4.30's. The only guy I know who "might" have run 4.30's in the auto is Nitro Lew, but he doesn't post much over here. Hopefully, someone will chime in who has experience with 4.30's in the automatic. BTW, that gear calculator I gave you the link to is pretty close to actual speeds and mph.

 

[KJ Hoppus]

Well, I'm trying to think of someone who has an automatic thats running 4.30 gears in the rear. I know plenty with 4.10's like RacerGT, Roque, Flo Bee, and others but none with 4.30's. The only guy I know who "might" have run 4.30's in the auto is Nitro Lew, but he doesn't post much over here. Hopefully, someone will chime in who has experience with 4.30's in the automatic. BTW, that gear calculator I gave you the link to is pretty close to actual speeds and mph.

im asking for people with 4.10s.

 

[godsmak53190]

im runnin a 4.30 but i havent been to the track yet with them

 

[007]

I've never ran at the track, but with 4.10s my car shifts into OD at about 110mph. So my revs would be right up around 5000-5500 rpm at about 100 mph I think. I'll go out later and see.

 

[e3troy]

I'm crossing through the traps between 5900 and 6000 rpm.

 

[okc2KGT]

nevermind

 

[Dark Knight GT]

im asking for people with 4.10s.

You gotta forgive me. I've had 10-12hrs. sleep in the last 4 days.

 

[KJ Hoppus]

I'm crossing through the traps between 5900 and 6000 rpm.

thanks. do you have the stock stall convertor and what kind of tires were you running?

 

[KJ Hoppus]

You gotta forgive me. I've had 10-12hrs. sleep in the last 4 days.

well get of the internet and get some sleep. lol its all good dude.

 

[Dark Knight GT]

I just now rememebered. Ask RacerGT. He ran a 13.039 without the spray in his automatic. He has a 3500 stall converter with 4.10's and some other bolt-ons.

 

[KJ Hoppus]

I just now rememebered. Ask RacerGT. He ran a 13.039 without the spray in his automatic. He has a 3500 stall converter with 4.10's and some other bolt-ons.

ok, thanks again

 

[e3troy]

KJ- I have a stock torque converter for the time being and the tires were 275/40-17 Nitto drag radials. This is also with bad 60 ft times as well. Usually, average a 2.05 60 ft time.

Troy