anyone have pix of aftermarket auto shifters installed

[Dip In Traffic]

im looking for an aftermarket shifter for my mustang .ide liek to see some pix of them imstalled...i dont reallly wanna hack up my console....

 

[85GTlover]

There should be no reason to hack up your console for an aftermarket shifter. Why you think that?

 

[TC93]

The B&M hammer is a nice shifter for the AOD that you don't have to hack up the console. I run the B&M Pro stick with my AOD , but have the electric OD. I think they have a plate for the B&M pro & Hurst 1/4 for it to work with the AOD. I also use the mounting kit from Holcomb motorsports that puts the Pro stick and 1/4 stick in the stock location. I didi have to notch my trim plate for the ****fer to go all the way into 1st, since I run my trans in manual mode.

 

[Matts89LX5.0]

dip, why do u want an aftermarket shifter lol???

 

[Dip In Traffic]

cuz i need to shift my car manually

 

[Dip In Traffic]

any more pix?????

 

[Dip In Traffic]

bump

 

[hllon4whls]

In order to shift the AOD manually and have it live, you cant do the 1-3-1 shuffle. You need a valve body that will allow you to do 1-2-3 directly. I dont know if the transgo kit you have does that or not. But check into that and tally that into the price.

I notice that a lot of people put a ratchet or a quarter stick in the ashtray slot and then put a blank plate in where the factory shifter goes.

I personally moved my shifter back close to that location for feel. I completely removed my console and just have fresh carpet there with a shifter over it.

 

[Dip In Traffic]

yea that trans go does wonders

 

[Toms302]

My 1991 LX 5.0 with B&M Hammer shifter. I sold the car a couple years ago.
No alterations to the console were required.

 

[5lterchvyeater]

hey guys i have a problem w my stock shifter after yrs of rebuilding my own tranny's . i went out and bought a manual/automatic AOD from GER and i cant get it to go into first, will the B&M hammer shifter solve that?? thanx

 

[ECU5.0]

hey hllon4whls...do you have a pic? im tryin to figure out how to do the part of the console with the radio in it without it looking stupid if i take out the rest of my console

 

[hllon4whls]

This might not help, but here is how mine is. I dont have a stock dash in the car.

When I did, I made a simple aluminum switch plate and installed. I thought that it looked fine. I didnt have my digital camera then, so no pic.

 

[ECU5.0]

oh ok, i didnt know your car was straight up drag style. looks good though.

 

[Dip In Traffic]

bump

 

[dastang2]

here is a b&m starshifter in my 91 tbird.

 

[shttygtstang]

here is a b&m starshifter in my 91 tbird.

those are some beet sandles them dogs are barkin

 

[Qwk88LX]

C4 - B&M Pro-Stick w/ reverse manual valvebody

 

[dastang2]

my wifes shoes

 

[90NotchBack]

Hurst pistol grip shifter Where the stock shifter went i made cup holders.