My friend got his N/a cobra dynoed he said and he claims he got 430 hp at the wheels. All he has done to it is valve springs and an F cam and a few other little thingies. He also said he ran a 12.3 with him driving and an 11.9 with a pro driving. This is all completely naturally aspirated no nitrous no blower no nothg !!! i dont beleive it.
95 Cobra 430RWHP N/A?!?!?!
- Thread starter mooktank
- Start date
-
Sponsors (?)
larrendeuce
Member
04sleeper
Founding Member
S/CBlack95GT
New Member
Mustang Yawie
Founding Member
mooktank said:
That guy doesn't have any where close to that power...he is adding about 200rwhp to his car that it don't have...
And if he had 430rwhp...he would be well past 11.9...
So he just lets a "pro" drive his car whenever they want...
It is absolutely 100% false on his claims
Show him this thread and see what he says...ask for the dyno sheet...
He is just trying to show how much faster he is than you...
In your signature...what do you mean by Stage II racing heads?
25thmustang
Mustang Master
Lets here the whokle combo first. For 430 N/A rwhp your gonna need a lot of motor. Im sure its possible but there needs to be a nice combo behind it!
revelationz
New Member
mattkimsey
I've compiled a list to recap this thread:
jaidedeye
Member
im running a way hotter n/a set up with my 306 and im only pushing 318 whp....im running 12.80's with 318 whp...he's running mid 12's with 120 more hp than me???? should be knocking on 11's
wheres the dyno print outs...?????
have you driven the car? .......maybe a 302 with 430 hp supercharged or juiced.....id say a 347 n/a would push 430hp at the wheels with heads ,cam ,intake and the whole 9 yards.....
i had a procharger P1SC on my 306 running 10 psi and a had 422 rwhp and 480 TQ.....
this dude is full of crap man
***s like you friend piss me off......tell him to go hang out with the ricers
wheres the dyno print outs...?????
have you driven the car? .......maybe a 302 with 430 hp supercharged or juiced.....id say a 347 n/a would push 430hp at the wheels with heads ,cam ,intake and the whole 9 yards.....
i had a procharger P1SC on my 306 running 10 psi and a had 422 rwhp and 480 TQ.....
this dude is full of crap man
***s like you friend piss me off......tell him to go hang out with the ricers
houstonstangguy
Founding Member
i hope this is what you looked like when he said that because somebody needs to make this jackass feel stupid. how good of a "friend" can he be if he is blowing so much smoke up your ass???he is a freaking liar and that is all there is to it.
I really don't think you could make 430rwhp N/A with a 347...not perfectly driveable and on pump gas?...You would need a lot of compression...
It's plain and simple that your "friend" is jealous of your car and has to be "faster" than you...
...He is lieing... 
And about his times...that "pro" driver wasn't to "pro"...
...300rwhp can get you a low 12 with traction...and I don't see how people talk about how if a "pro" driver was driving their car it would run this and that...if the owner of the car is a good solid driver...it is not very likely that a pro is going to do better (especially first time at the track) with a car he has never driven before...
It's plain and simple that your "friend" is jealous of your car and has to be "faster" than you...
...He is lieing... And about his times...that "pro" driver wasn't to "pro"...
...300rwhp can get you a low 12 with traction...and I don't see how people talk about how if a "pro" driver was driving their car it would run this and that...if the owner of the car is a good solid driver...it is not very likely that a pro is going to do better (especially first time at the track) with a car he has never driven before...mooktank said:
Not going to happen...and his engine survive...
About the Cobra owner...sorry but he is full of
Show him this thread and see what he says then...
Ask him for his dyno sheet...and what his "exact" mods are...
Similar threads
- Locked
