Help Identifying a cam

[nito88stang]

Its a roller cam with the non HO firing order. At the end of the cam the only thing it has is the number 231513 stamped on it. I've done a search of here and Corral for this number and also did a google search with no luck. If anyone can identify this cam for me or know where i can run that number and get a response i would greatly appreciate the help.

 

[giddyup306]

If your just trying to find out the specs any credible machine shop can do that.

 

[nito88stang]

I'm pretty sure its a stock ford cam, but i'm trying to find what application its for.

Reason being because i had a shortblock built by a local machine shop. I told them to put a stock HO cam in it but they put this thing in instead. So after finally figuring out my car ran like uber crap (wrong firing order) i was hella pist that i had to swap out cams. So i'm trying to see what cam the dimwit put in. (thinking most likely its a Tbird cam or something along those lines)

 

[1Slow5oh]

I wouldent say its a factory ford cam.
Most ford part#'s are something along the line of E--- or F---

IMO i dont think its a stock ford cam/But ive been wrong before

 

[NeVeRLiFt]

Could be a Crane cam. Call some Cam manufactors and give them the number and see what they say.