What does it take for a 4.6 GT to run in the mid to low 13's with street tires???

slayerripkdc

15 Year Member
Jun 3, 2003
1,341
16
59
brewster ny
Hey guys i recently totaled my 1990 5.0 and am in the market for a fox 4 GT:) I am just wondering what mods will bring her into the mid to low 13' with street tires???? Also is the top end more powerful then the 5.0s???? Like form a 3rd gear blast?
 
  • Sponsors (?)


A couple minor, but effective bolt ons and a bunch of practice will probably net you mid 13's. Low 13's can be had with more practice and maybe drag radials.

What I mean is, don't waste time/money with CAI's and swapping out your mufflers for some Flowmasters if you're looking for effectiveness. Gears, NO LESS than 4.10's, maybe a little bit of suspension tweaking and any other small thing you can think of to help your car breathe better, mid pipe, etc.
 
Redfire03GT said:
A couple minor, but effective bolt ons and a bunch of practice will probably net you mid 13's. Low 13's can be had with more practice and maybe drag radials.

What I mean is, don't waste time/money with CAI's and swapping out your mufflers for some Flowmasters if you're looking for effectiveness. Gears, NO LESS than 4.10's, maybe a little bit of suspension tweaking and any other small thing you can think of to help your car breathe better, mid pipe, etc.
:stupid:
mid pipe, gears, tires, some suspension
 
mods in sig, i havent ran the current set up in good weather, but in 95* heat i went 13.50...corrected to the high 13.1s(with the current mods). I am chasing 12's on street tires once i get my headers on in the next couple of weeks. Of course i am going to bolt the et streets on first to get it done, once i have the slip the street tires are getting put right back on to get that done.
 
13.608 @ 102.48 with just the UD pulleys and the Accufab goodies. Had good weather last week so that helped but it dosent take much if you drive them good. That was also not power shifting because I was loosing traction too much.
 
Jackie Chan said:
mods in sig, i havent ran the current set up in good weather, but in 95* heat i went 13.50...corrected to the high 13.1s(with the current mods). I am chasing 12's on street tires once i get my headers on in the next couple of weeks. Of course i am going to bolt the et streets on first to get it done, once i have the slip the street tires are getting put right back on to get that done.
Just curious where the 264rwhp estimate comes from? 225ish stock would be 40 rwhp from
Performance:
-Steeda Underdrive Pullies
-Superchip
-Steeda Tri-Ax
-BBK o/r X-Pipe
*Magnaflows w/turndowns*
*Accufab Plenum*
*Accufab 70mm TB*
:shrug:
 
WhiteDevil69 said:
Just curious where the 264rwhp estimate comes from? 225ish stock would be 40 rwhp from
Performance:
-Steeda Underdrive Pullies
-Superchip
-Steeda Tri-Ax
-BBK o/r X-Pipe
*Magnaflows w/turndowns*
*Accufab Plenum*
*Accufab 70mm TB*
:shrug:
its just a calculation that the website does probably based on weight and trap speed, i don't know what is up with it. Only the times matter to me
 
Jackie Chan said:
its just a calculation that the website does probably based on weight and trap speed, i don't know what is up with it. Only the times matter to me
haha, yah, I got the same crap with a HP calculator too, 275 with the mods in my sig. Thats what I figured, but thought maybe you had a factory freak or something :spot: Now if I could learn to drive like you I might actually post some times of my own
 
scalder said:
Don't see it happening w the stockers!!!!! Not a low 13 anyway....
ive seen it happen, justsomeguy on here ran 13.2 with a 1.9 60' on the stock suspension and gatorbacks. mods: 4.10s, TA, magnaflow xpipe and c/b, and maybe a cai(worthless). Tony Whetstone ran 12's with the same boltons I have (except manufacturers) with only lca's for suspension mods and he was on stock gears @ 3400+lbs.
 
Jackie Chan said:
ive seen it happen, justsomeguy on here ran 13.2 with a 1.9 60' on the stock suspension and gatorbacks. mods: 4.10s, TA, magnaflow xpipe and c/b, and maybe a cai(worthless). Tony Whetstone ran 12's with the same boltons I have (except manufacturers) with only lca's for suspension mods and he was on stock gears @ 3400+lbs.

What are gatorbacks? I've heard that term thrown around before.