I just need to know if there are any differences in the years, Ive been told there is not and I do not think there is. But it never hurts to double check with all the stang net people!!!!
-Marcel
-Marcel
Differences between 93 and 94 K members and A Arms?
- Thread starter haze187
- Start date
-
Sponsors (?)
88stangmangt
Active Member
im not sure since you can use sn95 spindles on a fox............but they do say 94-95 only k-member on all the sites so couldnt tell you.
maxumum motorsports says that their aftermarket k members will fit 79-95. As far as the A arms go, 94 - 04 are the same, I will re-use the ones from the 93 if they are not damaged. can anyone verify this info?
88stangmangt
Active Member
M&M is about the best so i would go with what they say....by the way how much you paying for there k-member? i like dand performance's K for 350...
From what I have read, there is the regular K member and the 4.6's K member. The A arms on the 94+ models are longer.
haze187 said:I just need to know if there are any differences in the years, Ive been told there is not and I do not think there is. But it never hurts to double check with all the stang net people!!!!
-Marcel
A arms are different lengths. Unless you know why you would use a different length A arm, dont change that.
Similar threads
