Ronstang said:
Shows how much you know. HAHAHAHA....most of the stuff on my car is one of a kind because I designed and made most the parts myself.
Really? For example??
Ronstang said:
I usually don't buy parts but raw material. I like things just the way I want them and not some vendor's half thought out execution of a good idea.
Really? So you're saying that the stuff you piece together out-performs Total Control Products? What about the dozen other mustang parts companies that put in large amounts of $$ into research and testing on their setups...? Just because you make it yourself, it doesn't mean you have a right to say that manufactured pieces by others are "half thought out". It means your parts are unique, not necessarily better.
Ronstang said:
A lot of the things on my current project you will not see on other cars.
Again.. such as?
Ronstang said:
Some things are similar because some things need to be on these cars.....like an export brace....and even though they provide basically the same funciton they don't all have to be the same in design or appearance.
OK, wait a minute. Now you're contradicting yourself. I said in my original post that you can't stand there and basically say that you are original. And you mean to tell me that you ARE because you make the SAME f**king parts that ALL the manufacturer's make but your's aren't exact duplicates?? You're not original then.. you're cheap. Look, it's not so much that what you do is bad, it's that you make it sound like it's the best and you talk trash about everyone elses parts/efforts. Be it a manufacturer building an export brace or be it me building a GT-500 from GISS. With that mindset, you're pretty much calling out 99% of the board members here and then you're also saying that if I built a regular GT-500 clone I'd be fine. That's no longer backing up your previous statement Ron, that's showing personal preference. And what gives you the right to tell me that I'm wrong for doing what I'm doing? Don't alienate others because they're not doing what YOU want.
Ronstang said:
I do get inspiration from what other talented people do sometimes but I always redesign to some degree if not from scratch to make sure it meets my standards.
It sounds like your "standards" are merely just "I'm better than everyone else".
Ronstang said:
I have never just copied what someone else did or even had another part in my hand when I designed.
Really? Because you just stated earlier that you did... IE: an export brace...
Ronstang said:
I take all my own measurements and draw my own conclusions on the best design under the given circumstances. I also have a tendency to make the same part 3 or 4 times with each iteration being an improvement. I can't leave things alone sometimes because there is always room for improvement.
Obviously you'd take your own measurements, etc. If you were building your own parts and relying on measurements from the web then you'd be an idiot. Although....
Ronstang said:
You can believe whatever you need to soothe your ego
Excuse me?! Who came into this thread with nothing but a rude comment towards me and SlnLax43???? YOU DID! Who just ranted 1/2 a page worth of "I'm better than everyone else... manufacturer's included". YOU DID. I only tend to get upset when people wrongfully accuse me of things that they are clearly doing at the time. You're a hypocrite Ron and that's the reason for my reply.
Ronstang said:
but I do and always have had unique parts on my cars and sometines they are the first ones ever made and sometimes the only ones ever made.
Is it too much to ask for examples? I'm just proving you wrong, don't get upset.
Ronstang said:
You really should learn to find out the facts before you open your big mouth
Again, you're the jack@ss that opened his "big mouth" first. Hypocrite.
Ronstang said:
at least I was accurate in my statement.
"At least" is used when people are at fault and are following up their admitted mistakes with excuses.
Ronstang said:
Just because you are not creative does not mean that others are not.
It's so hard dealing with a moron... it's like I'm arguing with someone from the Bush campaign.
Ronstang said:
I have restored cars all my life and that is boring now so I have to create things to keep my interest up, although handmade parts have made there way onto just about every car I have ever touched.
So now you're too good to restore cars. It isn't interesting enough for the great Ronstang.... pfff Do you sit in front of your computer with a burger king crown hat on?
Ronstang said:
BTW....you might want to read this:
http://www.lingsoft.fi/~reriksso/competence.html as it may help you understand why it is possible for there to be people out there that can accomplish things that defy your grasp.
BTW... you may want to read this:
http://dictionary.reference.com/search?q=Hypocrite
-or this-
http://dictionary.reference.com/search?q=jackass <--Refer to #2 if you get lost.
The fact that I can strip down an entire car to the bare shell and work by hand to rebuild, etc. Then convert it into an exact replica of a top end, $100,000+ Hollywood movie car that is highly sought after and ALL DONE AND FINANCED BY MY 21 YEAR OLD SELF for the FIRST TIME and RESPECTFULLY shows a lot. It also shows that I don't tread all over people's feet here and insult them because of ANY reason, let alone because of downright jealousy like you have for me. It's maturity. Unfortunately as you've shown, it doesn't come with age. So YOU watch your "big mouth" and stop spitting into the wind because it will ALWAYS come back to slap you in the face.
-Tim
Don't you have an original part to invent right now? Like a Z-bar, or a center console?? You know, things that no one has ever made as good as you... I mean hell, you came up with the ideas before they even made them!