360 HP on a GT with...?

[southernpony]

i would go with the ls6 intake and a lid to start with, then go with the mopar stage 3 upgrade along with the trd suspension package

ROFLMAO

Hey I got 2.5HP from my K&N Air Filter....wait I dont even have one.....

 

[merc123]

ROFLMAO

Hey I got 2.5HP from my K&N Air Filter....wait I dont even have one.....

The "Warning, this is a reusable filter" sticker gave me 1 3/4 HP.

 

[TurboSaleen#163]

How about a bone stock 97 4.6 motor with just a TDC turbo kit putting out 443rwhp and 496rwtq @9PSI..................mine does.Motor has nothing done to it.Just Borla exhaust cause its a Saleen.

 

[mustang70]

What are GT-40 heads?

They came on the 93 Cobras. It was Ford's first high performance head. It was replaced by the GT-40P which is on the 5.0 Explorers and Mountianeers.

 

[KenB]

With those exact mods, NO. But, you could get pretty damn close with the same amount of mods or similar. This is a video of a 321rwhp N/A 03 GT. Mods are:

-V&M Stg. 1 heads
-Comp Stg. II Cams
-Full exhaust (LT's, O/R H, Flows)
-CAI
-70mm TB & plenum

....thats it. With more aggressive heads and cams, better flowing catback (POS Flows ), and maybe even an X-pipe....you could see around 350-360rwhp

VIDEO:

http://www.need2speed.com/Movies/321rwhpNatAspmustangGT.WMV

Those are STD numbers, not SAE. SAE would be around 311 rwhp, which is still very good for the mods.

I've reached 370 rwhp and am hoping for 400rwhp before I pull the engine for some new things we want to try for next year.

 

[BullittStangV8]

4.6 with almost all the bolt ons short of cam and head work will give you around 255-265 rwhp. see the sig. Getting 360-390 hp would be pretty darn difficult. However, the pride of knowing you beat a blown 4.6 with a N/A 4.6 would be nice. (but expensive)
As for GT-40 heads on a 4.6, A cam, and A cat = lies. Simply not possible. He MAY have dropped in a 5.0? (old engine, not the modular stroker) What year is this car?
Mike

 

[BlackenedSVT]

One cam and GT-40 heads??? Did you turn into a Newbie all of the sudden?

Yeah i was thinking that too.
I've never even heard of GT-40 Heads on a 4.6. Thats a 5.0 mod...

 

[Jackie Chan]

Those are STD numbers, not SAE. SAE would be around 311 rwhp, which is still very good for the mods.

I've reached 370 rwhp and am hoping for 400rwhp before I pull the engine for some new things we want to try for next year.

i remeber the thread last year when we were all thinking 350 on a stock displacement 4.6 2v was hug, now you blew by that and are looking for 400...damn Ken

 

[svtguy]

Can you get 360 RWHP with:

4.6L SOHC
Mild cam
Straight pipes
Hi-Flow cat
GT40 heads
Underdrive pulleys

Yes....but you will need FlowMasters & a Electric Supercharger to make that combo work.

 

[mattwilliams]

www.seanhylandmotorsport.com

They sell a 400 HP N/A 2v, and a 500 HP supercharged 2v....but your gonna pay big bucks

 

[FrostyGT]

With those exact mods, NO. But, you could get pretty damn close with the same amount of mods or similar. This is a video of a 321rwhp N/A 03 GT. Mods are:

-V&M Stg. 1 heads
-Comp Stg. II Cams
-Full exhaust (LT's, O/R H, Flows)
-CAI
-70mm TB & plenum

....thats it. With more aggressive heads and cams, better flowing catback (POS Flows ), and maybe even an X-pipe....you could see around 350-360rwhp

VIDEO:

http://www.need2speed.com/Movies/321rwhpNatAspmustangGT.WMV

How much HP should i have after my setup and everything.I have a 2002 Mustang GT ,it's sitting at Dallas Mustang right now getting my goodies installed.My Mod's are:
*Trickflow Upper Intake
*70mm T-Body
*Densecharger CAI
*Pro-M 85mm MassAir
*Steeda Underdrive Pulleys
*4.10 gears
*Pypes X-pipe
*MAC Flowpath Mufflers
*180 Thermostate
NEW Addition that are getting Installed:
*FoxLake Stage 2 Heads
*XE262AH Comp Cam's
*BBK Shorty Equal Length Headers
*SCT/Custom Dyno Tune
IF anybody wants to take a Guess what my HP and Torque should be, be my guest.I would think around the 300RWHP range i would hope.
Another thing what Gears should i have with these Cam's that are getting installed?

 

[Jackie Chan]

How much HP should i have after my setup and everything.I have a 2002 Mustang GT ,it's sitting at Dallas Mustang right now getting my goodies installed.My Mod's are:
*Trickflow Upper Intake
*70mm T-Body
*Densecharger CAI
*Pro-M 85mm MassAir
*Steeda Underdrive Pulleys
*4.10 gears
*Pypes X-pipe
*MAC Flowpath Mufflers
*180 Thermostate
NEW Addition that are getting Installed:
*FoxLake Stage 2 Heads
*XE262AH Comp Cam's
*BBK Shorty Equal Length Headers
*SCT/Custom Dyno Tune
IF anybody wants to take a Guess what my HP and Torque should be, be my guest.I would think around the 300RWHP range i would hope.
Another thing what Gears should i have with these Cam's that are getting installed?

4.30s or at the very least 4.10s