trying to complete my project; coming on three years; need advice on fuel and exhaust. car will be daily driven. The engine is about 650 hp n/a with a carb, (607 hp before step headers, good plugs, and race fuel) and will have a dedicated fuel system for the fogger nitrous system. Talked to bb&t racing and they say aeromotive a1000 will not hold up, and I searched on stangnet and saw bad posts on the a1000. was thinking about barry grant stuff. what is a Dependable and Quiet fuel pump for the engine, that some of you may have on your cars? Also what is the quietest 4 inch muffler that will support about 1000 hp? Something that won't draw unwanted attention. Need all the help i can get. would appreciate any advice.600 plus hp stangs, need help!
- Thread starter wildstang607
- Start date
trying to complete my project; coming on three years; need advice on fuel and exhaust. car will be daily driven. The engine is about 650 hp n/a with a carb, (607 hp before step headers, good plugs, and race fuel) and will have a dedicated fuel system for the fogger nitrous system. Talked to bb&t racing and they say aeromotive a1000 will not hold up, and I searched on stangnet and saw bad posts on the a1000. was thinking about barry grant stuff. what is a Dependable and Quiet fuel pump for the engine, that some of you may have on your cars? Also what is the quietest 4 inch muffler that will support about 1000 hp? Something that won't draw unwanted attention. Need all the help i can get. would appreciate any advice.-
Sponsors (?)
giddyup306
Founding Member
- Oct 22, 2002
- 3,041
- 2
- 59
The aeromotive setup will support 1000hp with a carb. Dunno why they said it wouldn't hold up. As far as a quiet 4" muffler I have no idea.
EMW150
Founding Member
I've been running the BG220 HR pump for about 4 years now. The thing is reliable, flows like crazy, and works great even on the street. I run a -8an supply and -10an bypass line. So far I've just replace the filter element every other year and it keeps on working. For the Mufflers, I'd go Magnaflow definately. If you want it quieter, get the longest one they make. When you look at a Magnaflow, you can look straight through them and would think they'd be loud as hell but they're not. You'll make more power with this type muffler than a chambered muffler.
EMW150
Founding Member
morrisracing
New Member
I havent heard a fuel pump that would feed 1000 hp that is quiet. Not that someone doesnt make one , I just havent seen one. I use a product engineering pump and regulator. The pump flows 460 gph and is adjustable up to 43 psi and it is pretty noisy. Mufflers , I have no idea. I use the 5 in. Bullets and they are loud also. Hope this helps some.
morrisracing
New Member
wildstang607 said:
I guess that if I would have paid more attn. while reading your post, I would have seen that. LOL
Similar threads
