bought another 5.0!!!

[v850mustangluvr]

FIRST OFF MERRY CHRISTMAS EVERYONE!!!!!!!

OK, well I bought me a christmas present, another 5.0
I have a notchback now but the engine is all stock, so I found a '92 hatch w/ the following parts on it:::::

World Windsor JR cylinder heads
Manley Valves
Granatelli Motorsports pro-m mass air meter
Accel 24# fuel injectors
Trick Flow street intake manifold
Casper Electronics throttle enhancer
ARP bolts through out
Ford chrome oil pan with drain plug
Holley 155lph intank hi-flow fuel pump
BBK X-pipe
BBK shorty headers
Hooker Aero Chamber mufflers
Felpro gaskets
Goodyear blue hose kit
TrickFlow head dowels
Crane Cams hydraulic roller lifters
Accel u-groove short plugs
Ford Racing 9mm red plug wires
BBK adjustable fuel pressure regulator
Competition Cams hardened push rods
BBK cold air induction with hi-flow filter
ARP aluminum A.C. eliminator
70mm throttle body
70mm EGR plate
Trick Flow 3/8"tall manifold heat spacer plate
Harland Sharp aluminum roller rockers
MSD cap and rotor
Ford Motorsport heavy duty radiator
Summit chrome differential cover
Trans-go Shift Kit
Trans-go Hi-Rev kit
Felpro head gaskets
ASP underdrive crank pulley
Shorter belt
=========================================================

do yall think this car is pretty well built? I got it for $2500 seems like a good deal, he was my cousins friend and he works at a car shop so I think he knows what hes doing, but want to ask yalls opinion about the parts, how much HP do you think, he didnt know and never had it dynoed, so Im really in the dark, if yall think its a good built car, I guess i'll have 2 5.0, one notch and one hatch...the car has about 9,000 miles on the top part of the engine and 120K on the bottom? sounds pretty good to me but hey I can always sell it down the road and maybe double my money, so Its kind of a investment and hey I know its faster than my stock engine notch!!!

anyway let me hear yalls opinions!!!

thanks everyone, MERRY CHRISTMAS!!!!!!!!!!!!!!!!!!!!!!1

 

[v850mustangluvr]

also the only thing I dont see is a cam, what cam would be good w/ this set up, its a auto by the way...should I just get a trickflow cam, frpp cam or a custom cam....

 

[BaXTeR3221]

I'm gonna assume the car has gears, eventhough its not listed. Sounds like a good find. Heads might be a little big, especially with a stock cam, but i'll let someone with more knowledge tackle that one. But i would deffinetly go custom with a cam, it'll be the best for your combo or any combo for that matter.

 

[HISSIN50]

i probably missed it, but i would figure out what stall you have to help with determining what cam you might want (those two go hand in hand more than some folks give them credit for).

congrats - im jealous!

Happy Holidays!

 

[giddyup306]

I am Muslim and very offended that you wished me a Merry Christmas.
























Just kidding. Sounds like a great new toy!

 

[89CopCoupe]

Merry Christmas .... good find so far huh ...

Knowing which gears and if it has a stall converter helps us help you decide ... hard for me to believe he would have a stock spec cam in it with the other mods listed?

Well, you can't really go wrong with something under .500 lift and <220* duration .... don't know what valve spring lift figure capabilities ya get with WWJr heads

With the mild build you have now, I would say try a Ford 'E' cam or Trick stage 1 ... with an automatic you don't want to go with too big of a cam that will create a lot of overlap ... I would guess your rear wheel hp with a stock cam to be about 220-240.

I say pull the goodies out of the Hatch and put 'em in the notch (of course I have a bias )

 

[89CopCoupe]

I am Muslim and very offended that you wished me a Merry Christmas.

Well Merry Jihad and Decapitation Day to you sir

 

[v850mustangluvr]

hey everyone thanks for the input, actually it doesnt have a stall kit or gears, he said thats the only thing missing and that I would need them, he said go w/ a 4:10 gears for auto, what stall kit should I go w/...Im going to be driving it daily, so what do yall think...thanks guys!!

 

[giddyup306]

Does the engine lug when you accelerate from a dead stop? If not then you don't need a stall. If it does a little then gears may be all you need.

 

[90mustangGT]

I am Muslim and very offended that you wished me a Merry Christmas.

Well Merry Jihad and Decapitation Day to you sir

Is the car in good shape? If so you got a pretty good deal. What are you going to do, combine mods to one car and then sell the other? Or just have two mustangs.

 

[Darkhorse845]

Congrats and Merry Christmas!

 

[Matts89LX5.0]

i had those heads on one of my old cars, with gt40 intake and a comp cam with .530 lift and crane gold roller rockers 1.7....car screamed and ran 12.4 at 117mph with cornering suspension. Good luck with your car, sounds like a STEAL in my opinion. dump the AOD in my opinion

 

[hllon4whls]

A lot of people here dont like the windsor Jr's. They are a little rough as cast. If you just clean them up, they really come alive. They make as much peak hp as the AFR's (box stock), but AFR's have a better power curve.

I'm not dogging AFR's at all, just saying that IMO it is a good head for the price. Since you already have them, add an appropriate cam, gears and stall adn your smoking.

 

[Matts89LX5.0]

my windsor jrs were p/p so they flowed nicely

 

[willys1]

Nice find ,yeah 430's,,410's or 373's...If your keeping the stock cam,go with a 2500 stall,,,,but that motor is already set up for a cam,,its beggin you!!! If you get a cam,I would go for a 3000 stall!! JMO

 

[v850mustangluvr]

Hey everyone thanks for the info...yeah I'll probably just keep both cars for now, maybe down the road combine the parts to one car...

I'll probably go w/ a frpp E cam just because its a ford product and I dont know about a trickflow cam and how itll do, now with that said I dont know squat about AOD or stall kits, will a 3000 stall be to much for a daily driver once I put a cam and some 4:10 gears in!???

i really dont like aod I love sticks, does anyone know of a good place that sells a aod to 5 speed conversion kit w/ all the parts and how much, I wouldnt mind looking into that and say the hell w/ the aod and stall kit : ) !!!

anyway if yall can help me w/ the stall kit Id appreciate it!!

 

[Wil]

Wow, you got a really good deal! I paid almost double what you paid for and didn't get nearly half those parts. Good find and good luck with your new toy

 

[dude5l]

Did the guy actually say it was still a stock cam? I find it hard to believe he had the top end off to replace heads and lifters etc... but didn't add a cam. Did he just forget to mention it?