HISSIN50 said:sorry to hijack a bit
thanks I dont mind, I just wish my question would get answered feel free ask any other questions on this thread I dont mind.
what are spintechs like?
(so many muffers )
HISSIN50 said:sorry to hijack a bit
Yeah, my 2 cambers are nice tone but fairly quiet around 2000rpm, after 3000rpm thou its a different matter.They idel pretty "deep" with dumps, but nothing thats unbearable.When im at WOT and around 6500rpm thous thing are screamingScorcher2005 said:i have flowmaster 40 series 2 chambers w/ tailpipes. They have a nice idle, loud while accelerating and quiet when cruising around 60mph. This is also w/o all the sound dampening material in the back (took out the rear seats and all).
They get louder at bout 80mph+
HISSIN50 said:sorry to hijack a bit, but i think it is pertinant. with the bullets, do you guys do the install yourselves? what do you do to get around the stock pipes' offset? TIA.
bluevenom867 said:Yeah, my 2 cambers are nice tone but fairly quiet around 2000rpm, after 3000rpm thou its a different matter.They idel pretty "deep" with dumps, but nothing thats unbearable.When im at WOT and around 6500rpm thous thing are screaming
FiveLtrRiceEatr said:thats what I'm looking for, but everyone keeps saying flowmasters drone like crazy? I dont want dumps, I like tailpipes.
why do people not like flowmasters do they cause THAT much drone!?
stprorolla49 said:listen....i dont mean to be an ass at all....really....so dont take this the wrong way, but EVERY person on here is going to tell you a different muffler that they like, and the majority have flows....its what a mustang is SUPPOSED to sound like....but thats just my opinion..... really im not being an ass...just an honest opinion...good luck choosing.........FLOWS you'll be doing this if you dont get flows (2 chamber)......also if u wanna quiet it down a lil just get 3 chambers....at idle its nice and quiet, but at WOT......WOA.....its just about as loud as 2 chambers........
stprorolla49 said:well here's my honest opinion.....if you already have a catback with nice tips and pipes, just cut out the mufflers and weld in some 3 chambers.....or have a muffler place do it.....its cheap.......that way you could use the 200 bucks or so that you would have spent on a catback and put it towards somethin else on the car rather than buy a whole new catback.....just make sure that you order the mufflers with the correct inlet/outlet sizes.....
DirtyD916 said:get bassani street competition mufflers. In a test by 5.0 mustang magazine they were by far the loudest.
thanks for the feedback - ill call around. 50 bones aint bad. thanks again.ECU5.0 said:i had shop put them on for me. the guy fabbed up some flow tubes that were at an angle so they would line up with the tail pipes. he did a really nice job and only charged me 50 bucks
BlackDrop50 said:I have Borla on my 347 hatch, it is quiet at idle/cruising speeds, but it is very loud when I step on it. Sounds very nasty too. On my stock engine it sounded good too, not as loud, but still good.
3 chamber flows might satisfy you, I have them on my drop, they drone a little. I like the Borla better.