Whats the best PSI for ET Streets! I gotta drive home to!

Kdubslugga

Active Member
Jun 7, 2003
1,515
4
38
Akron, OH
Im geating ready to go to the with my ET Streets, but i dont know how many pounds to run. I went last night with my buddy and his 03 Cobra, and he ran them at 20lbs and only mustered a 1.8 60ft, but consistant 1.9's. He ran a 12.4@116, not bad for Flowmasters and a CAI. Anyway, i dont think my track has an air pump, so what is the best pressure to run on these things. The trip is about 35miles each way!
 
  • Sponsors (?)


Not sure about the PSI on those but with my ET Drags I ran around 12lbs and went 1.69 60ft with an AOD and 150 shot of nitrous. But I would suggest you buy an air pig. That way you can just fill the tires for the ride home. They are relatively inexpensive and really convenient when no compressor around at the track. Then you can just keep taking air out until you find the sweet spot.
 
pricha said:
Not sure about the PSI on those but with my ET Drags I ran around 12lbs and went 1.69 60ft with an AOD and 150 shot of nitrous. But I would suggest you buy an air pig. That way you can just fill the tires for the ride home. They are relatively inexpensive and really convenient when no compressor around at the track. Then you can just keep taking air out until you find the sweet spot.


how far can you drive on 12lbs? Enough for like 2 miles to a gas station?? im not sure if my track has air either, i wouldnt be surprised if they do though, they have racing fuel pumps and stuff, i noticed you said et drags, with the et streets how far can you go with recomended psi?
 
15psi's at the track, 25 on the street.Dude ask someone,usually every track has air...Besides theres gotta be a gas station between your hose and the track with an air house. You can drive for miles,just keep it under 60!!And dont fly around turns :rolleyes: