Head swap, on 19/lb injectors? Will there be a problem?

[Lynx331]

Hey guys im planning on doing a head swap on my car. I have converted to mass air and im using stock injectors with the stock MAF meter. My question is if i was to swap in heads, and a 255lph fuel pump... Will there be an issue with fuel? Since i will still have the stock mass air meter, and 19/lb injectors? I would only run it like this for a month or 2, once i get more money to buy a bigger mass air meter and bigger injectors. Also when i did the head swap i would most likely install a cam and 1.7 roller rockers, dont know if that makes difference. So would i be able to run my stock injectors and maf meter, with those mods? What do you guys think? Is there a chance i could damage my motor somehow from it leaning out?? Thanks for your help guys.

 

[5.0fox]

you should be ok with the 19 pound injectors. be sure to check piston to valve clearance with the cam and rockers.

 

[Numbles]

You will be fine with stock injectors. Definately spend the money to upgrade later though.

 

[speedracer238]

I'd have to say it depends on what head. A set of iron GT40 heads and AFR 165s are totally different.