i was wondering if i could put a set of 87-93 1/4 windows on my 80 lx with little or no problem?i cant stand the look of the old style ones and i am getting a set,so hopefully it wont be a waste of time 
cna you do this?
- Thread starter redrumracing01
- Start date
-
Sponsors (?)
Yes it can be done. Go buy a 1/4" tape kit from a glass shop first. The only thing is to make it look right you need the interior quarter trim panels to go with it or you will end up with an 1 1/2" gap between the glass and the panel. Easy to look in a see your seat belt mechanism. Then you will need 6 fender washer to use on the 3 forward mounting studs on each window on the new quarter glass. 79-86 stangs dont have holes drill in the sheet metal for these studs. The washers will overlap the edge of the sheet metal and hold the glass in. Also you will need to cut of the aluminum molding that goes from the side mirror back to the top of the quarterglass. I have a spare set of quarterglass available if needed.
Jeff
Jeff
im getting the 1/4s for a good trade but thanks any ways the car is compleatlygutted in side so the int dosent matter sooner or later its getting a 10pt cage,and is the 1/4" tape kit sortof like a double sided tape to seal the window?thanks for the help cant wait to get em instangman393 said:
white 89 GT
Member
not too much more weight 
i just want to improve on the exterior looks of the car after i do that im buying a saleen ground effects kit nad getting it ready for paint.
i just want to improve on the exterior looks of the car after i do that im buying a saleen ground effects kit nad getting it ready for paint.Similar threads
