cjman15
Banned
I just saw T3/T4s selling on ebay for like 250-300 a piece... i wish i could weld or i'd try somethin like that
All junkyard turbo information here please!!
- Thread starter emagdnim
- Start date
-
Sponsors (?)
millhouse
Founding Member
emagdnim said:
No, he's going to max out around 350 hp. With his boost levels, he'll be lucky to hit 275 rwhp.
BlackFox5.0
Founding Member
I went the DIY route, I love it, but you tend to run into a lot of problems just putting it together. there was a few times where I stopped and thought how can I make this work.
Numbers in my sig are untuned. I'm upgrading the turbo, so the numbers MAY jump just a tad more
Numbers in my sig are untuned. I'm upgrading the turbo, so the numbers MAY jump just a tad more
BlackFox5.0
Founding Member
Um, it added up, I don't think I want to know what it came to. You can find a similar turbo pretty cheap if you know what to look for. It's pretty much the same thing as a T04E. Use ebay or your junkyards, many big trucks use T4's. The turbines are usually huge like 1.09 A/R etc.. but you can get one off ebay for like 60 bucks.
Um I do have TwEECer, but I didn't really tune it too well, and I was using a draw thru meter, plus my clutch decided it had enough so I think my numbers are pretty much anidea of what it's making. My clutch just didn't want to hear the torque.
Um I do have TwEECer, but I didn't really tune it too well, and I was using a draw thru meter, plus my clutch decided it had enough so I think my numbers are pretty much anidea of what it's making. My clutch just didn't want to hear the torque.
BlackFox5.0
Founding Member
Definately, just make sure the turbine is the right size otherwise it'll take all day to spool. turbines are interchangable so you can get a turbo with a large housing and put on a smaller one.
mustangjoe87
Member
that is ghetto as hell, looks like ass. all that oil all over everthing, WHY? JUST DO IT RIGHT GOSH, Flipping idiot
millhouse
Founding Member
millhouse
Founding Member
Check out pages 3 & 4 on the link posted above. There are several references to single turbo's that could be used. Do a search for "powerstroke or " "Cummins" and you'll find quite a bit of info. All the info is over there, you just have to look for it.
Also…your lucky I don’t get pissy like many others on here. You just gotta be careful…as flame wars are quite easy to get into. You also don't want to loose your credibility...People will be much less likely to help out.
Also…your lucky I don’t get pissy like many others on here. You just gotta be careful…as flame wars are quite easy to get into. You also don't want to loose your credibility...People will be much less likely to help out.
A simple thank you apology accepted woulda done.. but hey wut would you recomend? single or twins. Im planning a trip to about 3 yards today. Imma be posting a new thread on it as Im stoked about starting this up. I have a list from summit of parts I have gathered that I would need. See if you can fill me in on anything I have left out... thanks
Similar threads
