I want to run a concealed nitrous system with just a small shot in case I get into some trouble with a ZO6 or something. I was going to run the sneaky pete system but the guy said that it is for carbuerated cars. I was wondering if I can buy some kind of nitrous setup minus the bottle and then buy the 10oz bottle. Or can I make it out of components? Anybody have any suggestions?
Help with custom nitrous setup
- Thread starter crunchie12268
- Start date
-
Sponsors (?)
How about that bottle in a bag thing? I don't know too much about them, but I know somebody makes it. You might as well just use the full size bottle so you don't have to recharge it constantly. The whole "in case I get in trouble with a ZO6" will more than likely quickly become "in case anybody in any type of car attempts to race me." .. join the club.
what i would suggest is running a regular sized bottle and put it under the rear seat, don't know about a fox but a 94-95 you can trim some of the seat cushion down and put in there. as for the lines just use your imagination, then run them to 90 deg unions in the back of the lower intake and to junction blocks that feed 8 indiv fogger nozzles tapped into each intake port on the underside of the intake. some creativity is again needed for shielding all your lines from the oil in the lifter valley, but you should get the idea. DISCLAIMER: i can neither confirm nor deny any such activity on any vehicle i posess.
Daniel50
New Member
i have the nitrous in a bag system. you cannot tell its their at all by looking in the engine bay and in the car if you look in there is a gym bag sitting there. thats it. totally hidden. you can run anywhere from a 20-100 hp shot. the kit take 10 mins to install. and its cheap. compucar makes it
Similar threads
