Removing The Pins From The '06 Pony Emblems?

[Jennifer6525]

For those of you that have added the '06 emblems to your V6 can you tell me how you removed the pins? Thanks!

 

[fazm83]

Im sure you can use numorous things. Sandpaper, die grinder, grinding wheel. i own a shop, i get creative at times haha.

 

[rygenstormlocke]

I'm very interested in this, I purchased some pony emblems from a classic mustang site, but I am not going to drill holes into my fender.

What I found is my emblems are hollow, so using double sided 3m tape won't work with out filling the emblem. Anyone know if there is a place that sells them ready to go?

 

[bigcat]

For those of you that have added the '06 emblems to your V6 can you tell me how you removed the pins? Thanks!

use some dykes (wire cutters) it takes then down in a snap!! or you could use a razor blade. the emblem is just plastic.

 

[stanmckinney]

You can snip them off or grind them off. But there are Mustang emblems available from most suppliers that stick on and have no pins.
They should not be difficult at all to find.

 

[martimus]

I used a simple cutting bit on a dremel tool. The pins were off the emblem in a matter of seconds.

 

[Jennifer6525]

Thanks everyone! I didnt realize that the pins were plastic I thought they were metal.I was going to take them to work and have one of the maint. guys cut them off for me but I guess I'll be able to do it myself.Thanks again.