The Post Your Drag Strip Results Thread!

[Turbo 05]

What tire size were you running on? Thats really good all stock, that one guy had some slight mods, but i thought the car should have been a little faster.

I cant wait till i get my 2006. Im waiting for the 40th anniversary of my first stang and first car, my 66. Its been a hard time being so patient! lol

stock tires on stock rims, everything is stock

 

[Motorhead6T5]

<--- new times for me

 

[cleveland]

Hey Motorhead, was that Wednesaday night's brackets? I was up there just last week and I wont be up there again until I put in my gears and relocation brackets for my LCAs.

What Drag Radials did you mount btw and what was the 60ft?

We need to actually show up there on the same night.

-Dan

 

[Motorhead6T5]

Hey Motorhead, was that Wednesaday night's brackets? I was up there just last week and I wont be up there again until I put in my gears and relocation brackets for my LCAs.

What Drag Radials did you mount btw and what was the 60ft?

We need to actually show up there on the same night.

-Dan

Yes it was wed. night. I ran 275/40-17 bfg dr's on the stock rims. My 60' was 1.906, I will be there back on the 1st for grudge night.

 

[cleveland]

Im attending the Apex carshow that morning but I believe I will be back up there on the 21st for test 'n tune. Im also bringing a group of people cause its a big birthday weekend, mine and a friend's.

Hopefully by then I can get some more mods installed. Namely headers and gears with a tune from Altered Speed.

-Dan

 

[Motorhead6T5]

Im attending the Apex carshow that morning but I believe I will be back up there on the 21st for test 'n tune. Im also bringing a group of people cause its a big birthday weekend, mine and a friend's.

Hopefully by then I can get some more mods installed. Namely headers and gears with a tune from Altered Speed.

-Dan

If you don't have any yet I would get et streets or dr's.

 

[Blazing Saddles]

 

[1994STEEDA]

"street master" all tire munf. state the MAX pis on the sidewall..... good luck taking off with your tires a "50psi!"

 

[cleveland]

"street master" all tire munf. state the MAX pis on the sidewall..... good luck taking off with your tires a "50psi!"

If you are refering to me I think you didnt read through the whole thread.

Anyways, Im using my "hook-ups" to order in the M/T Street Radials on Monday at cost + 10%. I love good deals.

My LCA relocation brackets should be here this next week and the 410 gears should be here within 2 weeks since Im ordering them tomorrow. I still dont know what Im going to do for a pair of wheels though. Im tempted to just pickup an extra 2 wheels like the ones I already have but I'd rather run a 15" wheel with more tire at the track.

Im trying to prep for my return to Sacramento on the 21 of next month.

I still would like to know how well the Hooker Super Comps perform when compared to the JBA LTs.

-Dan

 

[hotmustang331]

Ok Cleveland:

Here are the numbers with my first time running the 05 GT 5 SPD down the 1/4 mile.

Saturday Aug 13th 85 degree's in Fontana, CA

I ran a total of four times my best time was my last run around 9:40 PM. Current mods are. 1) Steeda underdrive pulleys 2) Magnaflow Magnapack Exhaust

I'm currently at 284 RWHP and 301 FT TORQUE

R/T .442
60' 2.323
330 6.200
1/8 9.384 MPH 79.40
1000 12.096
1/4 14.383 MPH 99.02

Running street tires BFG KDW2 35 PSI 295 X 35 with Boyd Cottington Smoothie II's and kept spare tire in trunk.

Do these numbers suck for a rookie or what?

Well maybe its your shift points Could be your elevation.

Just for reference I have 274RWHP in my 04 (about 280 with my electric waterpump) and was able to run a 13.30 @ 104.14 2.01 60' in full street trim...only thing done was remove headlight (which didnt do ANYTHING on earlier before/after runs...but i just left it out). So i think there is some room for improvement...good luck.