what grit emery cloth to clean up cam??

[Foxfan88]

i am wanting to smooth out and polish the cam where it meets the cam bearings, i used 240 on my crank so is that what i should use on the cam???

 

[MustangPunk302]

I used 3M™ Microfinishing Film on camshafts and cranks. I got it from my local machinist, it came in rolls. I'm not sure what grit it is, it's pretty damn fine though..

 

[Michael Yount]

I use 1500 grit sandpaper lubed with motor oil. VERY smooth, polished surface while removing minimal material. Cut long, thin strips (lobe/journal width), wrap the around the lobe/journal, and pull back and forth so you exert even pressure across the lobe/journal face.