93 cobra intake

[95blackstanggt]

will a 93 cobra intake fit under a cobra r hood 1.5 cowl on a 95 gt

 

[RIO5.0]

Yes...

 

[95blackstanggt]

thanks man

 

[DarkProphet]

Yes, but it WONT fit under the stock strut bar (if you have one). My steeda one clears fine though.

 

[18mustangs]

The '93 Cobra intake will even fit under the stock hood, but the TB PCV tube will rub a hole in the hood blanket if you don't remove the blanket.
Tim

 

[95blackstanggt]

but tim i got the r hood now plus a 1'' spacer

 

[RIO5.0]

I run that 93 intake with a 1/2" spacer and the R hood....You got plenty of room...I have alot of clearance above mine..

 

[95blackstanggt]

that pic helped it will fit with room to spear

 

[18mustangs]

but tim i got the r hood now plus a 1'' spacer

Reagan, I didn't know you had the spacer until this morning! With the Cervini's Cobra R hood you'll be GTG like Andy said. Do you have the bolts for the 1" spacer? It'll be a PITA to find the 5\16-18 x 8" hex bolts for the two tallest bolts in the upper intake with a 1" spacer. Andy put up a website for bolts earlier, but you might want to check Lowe's jsut in cast as that's where I found my 5\16-18 x 7" hex bolts for my 93 cobra intake.
Tim