pcv screen

slow93

New Member
May 3, 2005
406
0
0
ok i have been getting oil up my TB and spacer and i was told that it could be caused by the pcv screen being bad..i took my pcv valve out and there is no screen at all...i have a vortech upper with a ported truck lower..is there any way to "make" a screen. i looked at my old stock lower and it looks like maybe i could use some steel wool or something..even if i do make some type of screen to put in there,will it fix my problem??
 
  • Sponsors (?)


You could easily introduce a filtration system between the PCV Valve and the intake/tb. Do a search and you will find out how. It took me about 45 min and $25 to make my setup. The filters are drainable, so without having that screen you will likely be emptying it a lot.

If you don't like Lowe's/Home Depot, Steeda sells a complete kit (looks dead on like what I made, even uses same filter style).
 
yeah im sure i dont have one...when i felt around, i could fell all the way down to the baffle in the lower intake..i had a stock intake that i checked that is the only way i knew i didnt have one for sure