Front Fascia - anyone dont the replacement themselves?

[gp001]

I am replacing my front fascia and need to know how to remove the rear most nut attching the fascia edges to the fender. Do you need to completely remove the inner wheel well to access this nut?

I tried searchig, but all the resuts were more about what people have done or want to do, but not how they did it

Thanks in advance

 

[bigcat]

i have nerver completely removed the inner splash shield from any car i have worked on, at least when removing the bumper. it usually just pulls out of the way enough for access to the bolts/retainers.

 

[Madhouse]

just take out the 3 screws holding the front fascia to the inner fender liner, then pull the liner back to reach the two nuts holding the fascia to the car (on each side)

then remove the 4 little (5.5mm) bolts on the underside of the fascia where it attaches to the splash guard

then take out the two bolts holding the fascia down to the front clip and slide it forward off the car - unplug the fogs and corner marker lights and it comes right off