guys, i need motivation to spend $625

[DerekStangGT]

so i just ordered a Torsen T2 31 spline differential. not bad at $300 from ebay, brand new. plus ive heard they are the best out there, especially for road racing. now i need axles. any strenth issues with FRPP 31 splines? im guessing axles arent like diffs, w/ pros and cons. axles just have to be strong, right?
also, question #2. what EXACTLY else will i need for the install. some kind of install kit i know, but what? axle bearings? shims? girdle gasket? links appreciated
thanks

 

[imblown-ru]

call moser. they will set you up with what you need. and are pretty cheap for what you get.

 

[DerekStangGT]

call moser. they will set you up with what you need. and are pretty cheap for what you get.

but i dont wanna spend $269 if i can get the same or very similiar quality for $225 as far as axles. is moser's install kit THAT much better quality than FRPP?

 

[DropTopPony]

my moser 31 spl were like 250 dollars...frpp install kit is like 50 dollars

 

[imblown-ru]

make sure the frpp axles include race studs and anything else you will need. my moser quote was like 270 with race studs and everything.

 

[DerekStangGT]

make sure the frpp axles include race studs and anything else you will need. my moser quote was like 270 with race studs and everything.

everything means including install kit? i dont really know what the "install kit" is, so i'll continue to refer to it as an install kit.

 

[SaleenGT2001]

get the moser axles. thats what i have and they are nice !

 

[DerekStangGT]

my moser 31 spl were like 250 dollars...frpp install kit is like 50 dollars

from where? ive seen different FRPP kits ranging from $30 to $80

 

[DerekStangGT]

so the general consensus is to buy moser? no one has any experience with frpp?

 

[04DarkShadowGT]

I dont think FRPP are necessarily bad but Moser are awesome. My buddy had them in his old 97 Formula Firebird with 450whp and launched on slicks.

I am getting them for my GT no doubt about it. That and Moser is in Indiana so support the hoosiers.

 

[hotmustang331]

Yea Mousers are very good. And really all you need Derek is a master install kit from Ford. That will include all bearings and shims....should be about $100.

 

[Stang|ess]

People on Corral say Moser is a step up from stock. Go with Strange.

 

[Mossberg]

Moser FTW!!! Call directly to Moser. They will set you up with what you need.

 

[helty]

I think FRPP is made by strange or Superior. Superiors come with a 5 year warranty too (Summitt), if that makes a difference for you.

Ive heard good and bad things about every brand. With axles its kind of a crap shoot. I was looking at Mosers, FRPPs, Strange and Superiors, but Im poor so it doesnt matter. Id say Mark Williams axles but you're on a budget, so they wont be an option.

 

[DerekStangGT]

ok, well, i just won a set of brand new 31 spline moser axles and wheel studs from ebay for $192. not too bad i guess so now all i need is the ford install kit. any idea where i can pick one up? i saw a few different ones from gene evans ford (gefracing.com), but dont know which one i need. after that, just fluid i assume?