Transmission Bolt HELP!!!

[stang_racer69]

I need the two bolts that go into the very bottom of the bell housing to bolt to the block. These are both missing out of my car, and Ford nor NAPA can look up the part number or size. This is on a 92 T-5 but I belive would be the same for any 87-93


Thanks guys

 

[stang_racer69]

looking in this pic at the bottom of this thread it is the two bolts that would be in the very bottom of this plate

http://forums.stangnet.com/showthread.php?t=621741&highlight=bell+housing+bolt

 

[chobracobra]

Those bolt holes are for the index plate to the bellhousing. Not to the engine.
(You do mean where the plate is hanging from in the picture, right?)

 

[stang_racer69]

it would be the two holes in the bottom of the picture, the one on the electric outlet in the picture and the one to the left of it.

 

[stang_racer69]

anyone?

 

[Ny Mustang Guy]

the best bet would be to figure out exactly what size bolts go in those 2 holes.. and go to a hardware store to see if you can locate the sizes you need.. If you have bolts that fit but are too long.. you can find a place to shear off the end of them to the right length if you want to do that.. just make sure when you shear off the unneeded length that the threads on the bolt are clean and do not get messed up

 

[chobracobra]

oooo haha those are the top bolts, not bottom. The plate is upside down in that pic. Those should be the same as the others, just shorter.